SuperStorage 6029P-E1CR16T - Server Supermicro - Free user manual and instructions
Find the device manual for free SuperStorage 6029P-E1CR16T Supermicro in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rackmount Storage Server |
| Brand | Supermicro |
| Model | SuperStorage 6029P-E1CR16T |
| Form Factor | 2U Rackmount |
| Processor Support | Dual Intel Xeon Scalable processors (Socket P) |
| Chipset | Intel C621 |
| Memory Support | Up to 2TB DDR4 ECC Registered DIMM |
| Drive Bays | 16 x 3.5-inch hot-swap SAS3/SATA3 |
| Storage Controller | 12Gb/s SAS3 via optional controller or Intel VROC |
| Networking | Dual 10GBase-T Ethernet ports |
| Expansion Slots | Up to 6 x PCIe 3.0 x16 slots |
| Power Supply | Dual redundant 1200W hot-swap power supplies |
| Cooling | 5 heavy-duty fans with optimal speed control |
| Dimensions (W x H x D) | 437 x 89 x 650 mm |
| Weight | Approximately 28 kg (fully loaded) |
| Management | IPMI 2.0 with dedicated LAN |
| Security | TPM 2.0 header, intrusion switch, secure boot |
| Maintenance | Tool-less access to hot-swap bays and fans |
| Repairability | Field-replaceable power supplies, fans, and drive carriers |
| Operating Environment | 10°C to 35°C (50°F to 95°F), 8-90% humidity |
Frequently Asked Questions - SuperStorage 6029P-E1CR16T Supermicro
How do I access the BIOS setup utility on the Supermicro SuperStorage 6029P-E1CR16T?
Press Delete repeatedly during POST to enter the AMI BIOS setup. For the boot menu, press F11.
Can I use SATA drives in the SAS3 backplane?
Yes, the 16 bays are universal and support both SAS3 and SATA3 3.5-inch drives.
How do I replace a failed hard drive?
Identify the failed drive via the LED indicator, then unclip the drive carrier, insert a new drive, and lock it. The RAID controller will automatically rebuild when configured.
How do I reset the administrator password on the BMC/IPMI?
Use the IPMI web interface or ipmicfg utility to reset the password. For a factory reset, set the JPBAR1 jumper on the motherboard.
What is the maximum memory capacity?
The server supports up to 2TB of DDR4 ECC Registered/LRDIMM memory in 16 DIMM slots.
How do I update the system BIOS?
Download the BIOS update from Supermicro's website, save it to a USB drive, and use the bootable flash utility or the BMC web interface to apply the update.
How do I set up remote management?
Connect to the dedicated IPMI LAN port, assign an IP address, and access the web-based management console for remote KVM, sensor monitoring, and media redirection.
What is the maximum storage capacity?
With 16 x 3.5-inch bays, you can achieve a raw capacity of up to 256TB using 16TB drives, or 384TB with 24TB drives.
How do I install the server into a rack?
Use the included quick-release rails that fit a standard 19-inch rack. Adjust the rail length to match the rack depth and secure the server.
What should I do if the server does not boot?
Check the IPMI event log, verify the power supply LEDs, ensure DIMMs are fully seated, and confirm the boot order in the BIOS.
User questions about SuperStorage 6029P-E1CR16T Supermicro
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual SuperStorage 6029P-E1CR16T - Supermicro and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SuperStorage 6029P-E1CR16T by Supermicro.
USER MANUAL SuperStorage 6029P-E1CR16T Supermicro
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Supermicro
Model : SuperStorage 6029P-E1CR16T
Category : Server