Zixi zRAMP-4 - Diffuser JVC - Free user manual and instructions
Find the device manual for free Zixi zRAMP-4 JVC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional Video Receiver and Aggregator |
| Brand | JVC (Zixi Technology) |
| Model | Zixi zRAMP-4 |
| Category | Broadcast Video Equipment |
| Dimensions | 19 x 1.75 x 16 in (482 x 44 x 406 mm) |
| Weight | 12.7 lbs (5.8 kg) |
| Power Supply | 100-240V AC, 50/60Hz, 120W |
| Video Input | Up to 4 Zixi-protocol IP streams |
| Video Outputs | 4x 3G-SDI, 1x HDMI |
| Audio Output | Embedded SDI/HDMI audio, AES/EBU optional |
| Network Interfaces | 2x 1GbE, 1x 10GbE SFP+ |
| Protocols | Zixi, SRT, RTP, UDP, TS |
| Supported Resolutions | SD, HD, 3G, up to 1080p60 |
| Control | Web-based management console, REST API |
| Streaming Aggregation | Automatic error recovery and packet loss handling |
| Monitoring | Real-time status, SNMP, syslog |
| Display | Front-panel LCD for status |
| Mounting | 1U rack-mount kit included |
| Operating Temperature | 0 to 40 C (32 to 104 F) |
| Storage Temperature | -20 to 60 C (-4 to 140 F) |
| Humidity | 10% to 90% non-condensing |
| Compliance | FCC, CE, RoHS |
| Maintenance | Keep vents clear; wipe exterior with dry cloth |
| Safety | Do not open chassis; no user-serviceable parts |
| Repair | Contact authorized JVC service center |
| General Info | Firmware upgradable; 1-year warranty |
Frequently Asked Questions - Zixi zRAMP-4 JVC
What is the Zixi zRAMP-4 used for?
The Zixi zRAMP-4 is a professional video receiver and aggregator that ingests Zixi-protocol streams over IP networks and outputs them via SDI/HDMI for broadcast or monitoring applications.
How many simultaneous channels does the zRAMP-4 support?
It supports up to 4 simultaneous Zixi streams, allowing multiple channels to be received and aggregated at once.
What video resolutions are supported?
It supports SD, HD, and 3G-SDI formats up to 1080p60. Check the manual for the latest firmware support for higher resolutions.
How do I connect the device to my network?
Connect the 1GbE ports or the optional 10GbE SFP+ to your network, then assign an IP address via the front panel or use DHCP. Access the web interface for full configuration.
Can I use it with my existing JVC broadcast equipment?
Yes, the zRAMP-4 is compatible with Zixi-enabled encoders and decoders, including those from JVC, as long as they transmit Zixi protocol streams.
Does the device provide error correction for unreliable networks?
Yes, it incorporates forward error correction (FEC) and automatic retransmission to ensure video integrity even under high packet loss.
How can I update the firmware?
Download the latest firmware from the official support site, then use the web management console under System > Update to upload and install it. The device will reboot automatically.
What are the environmental operating limits?
The device operates within 0 to 40 degrees Celsius and up to 90% non-condensing humidity. Always maintain proper airflow in the rack.
Are there any user-serviceable parts inside?
No, the chassis is sealed to prevent electrical hazards. For repairs, contact authorized JVC service personnel or the point of purchase.
What output interfaces are available for monitoring?
The rear panel provides 4x 3G-SDI outputs and one HDMI output, with embedded audio on all interfaces.
User questions about Zixi zRAMP-4 JVC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Diffuser in PDF format for free! Find your manual Zixi zRAMP-4 - JVC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Zixi zRAMP-4 by JVC.
USER MANUAL Zixi zRAMP-4 JVC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : JVC
Model : Zixi zRAMP-4
Category : Diffuser