HR-100 - Controller Crestron - Free user manual and instructions
Find the device manual for free HR-100 Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Handheld Controller / Remote |
| Dimensions (W x H x D) | 6.0 in x 1.75 in x 0.75 in |
| Weight | 4.5 oz (128 g) |
| Power Source | 1 x CR2032 3V lithium battery |
| Battery Life | Up to 3 years typical (based on usage) |
| Wireless Protocol | infiNET EX® 2-Way RF (433 MHz) |
| Wireless Range | 150 ft (45 m) line of sight |
| Programmable Buttons | 5 configurable rocker and push buttons |
| LED Indicators | Bi-color red/green status LED |
| Compatibility | Works with Crestron control systems (e.g., CP3, MC3, DIN-AP3) |
| Enclosure Material | High-impact plastic resin |
| Finish | Matte black with gray buttons |
| Mounting Options | Handheld, table stand (sold separately) |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Humidity Rating | 10% to 90% RH (non-condensing) |
| Cleaning Instructions | Wipe with a soft, dry cloth; avoid harsh solvents |
| Safety Compliance | UL, CE, and FCC certified |
| Repairability | Battery and cover easily replaceable; no special tools required |
| Spare Parts | Replacement battery cover (CRESTRON-BC-HR100) and CR2032 battery |
| Programming Software | Crestron Studio / SIMPL Windows |
Frequently Asked Questions - HR-100 Crestron
How do I pair the HR-100 with my Crestron processor?
To pair the HR-100, place your Crestron processor into pairing mode using Crestron Studio or the touch screen, then press and hold the top rocker button on the HR-100 for 5 seconds until the LED blinks green. The processor will confirm successful pairing.
What type of battery does the HR-100 use and how long does it last?
The HR-100 uses a single CR2032 3V lithium coin cell. Under normal use, the battery can last up to 3 years. When the LED flashes red, the battery is low and should be replaced promptly.
Can I use the HR-100 to control lights and shades?
Yes, the HR-100 is designed to control lighting, motorized shades, and scenes. Each button can be programmed to trigger specific functions such as on/off, raise/lower, or preset scenes.
How do I program the HR-100 buttons?
Use Crestron Studio or SIMPL Windows to assign actions to each button. Connect the HR-100 to your processor via the infiNET EX RF network, then drag and drop commands to the buttons in the software.
What is the wireless range of the HR-100?
The HR-100 uses the infiNET EX protocol and provides a typical operating range of up to 150 feet (45 meters) in open air. Walls and interference can reduce range, so place your processor centrally.
Does the HR-100 provide any feedback to the user?
Yes, the bi-color LED on the HR-100 shows operational status. Green indicates successful command reception, red indicates low battery or error, and flashing patterns indicate pairing mode or programming.
Is the HR-100 compatible with older Crestron systems?
The HR-100 is compatible with any Crestron control system that supports infiNET EX communication. For legacy 2-Series processors, ensure they have the latest firmware or an EX expansion card.
How do I clean the HR-100?
Clean the HR-100 with a soft, dry, lint-free cloth. If necessary, slightly dampen the cloth with water or a mild detergent. Do not use abrasive cleaners or immerse the remote in liquid.
What are the physical dimensions and weight of the HR-100?
The HR-100 measures 6.0 x 1.75 x 0.75 inches (152 x 44 x 19 mm) and weighs 4.5 ounces (128 grams) including the battery. Its ergonomic shape fits comfortably in hand.
How can I reset the HR-100 to factory settings?
To perform a factory reset, remove the battery, wait 10 seconds, then reinsert it. Press and hold the bottom rocker button for 10 seconds while the LED flashes. Release when the LED turns solid green.
User questions about HR-100 Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual HR-100 - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HR-100 by Crestron.
USER MANUAL HR-100 Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : HR-100
Category : Controller