iLux CLSI-C6MA - Controller Crestron - Free user manual and instructions
Find the device manual for free iLux CLSI-C6MA Crestron in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Lighting Controller |
| Brand | Crestron |
| Model | iLux CLSI-C6MA |
| Number of Channels | 6 |
| Control Protocol | Cresnet |
| Supported Load Types | Incandescent, halogen, electronic low voltage (ELV), magnetic low voltage (MLV), fluorescent, and LED |
| Maximum Load per Channel | 800 W (120 V AC, 6.6 A) |
| Dimming Technology | Leading-edge and trailing-edge |
| Mounting | 2-gang wall box |
| Dimensions (H × W × D) | 4.12 in × 4.12 in × 1.75 in (105 mm × 105 mm × 44 mm) |
| Weight | 0.9 lb (408 g) |
| Power Supply | 24 VDC via Cresnet |
| Operating Temperature | 32°F to 104°F (0°C to 40°C) |
| Relative Humidity | 10% to 90% (non-condensing) |
| Faceplate | Custom paintable plastic |
| Indicator LEDs | 6 channel status LEDs, 1 power LED |
| Local Controls | 6 programmable pushbuttons |
| Firmware Update | Via Crestron Toolbox |
| Certifications | UL Listed, CE, FCC Part 15 Class B |
| Warranty | 3 years |
Frequently Asked Questions - iLux CLSI-C6MA Crestron
How do I install the iLux CLSI-C6MA lighting controller?
Turn off power at the circuit breaker. Connect the line, neutral, and load wires to the corresponding terminals on the Cresnet wiring bay. Establish the Cresnet bus connection to the control system. Mount the controller in a 2-gang wall box using the supplied screws.
Is the CLSI-C6MA compatible with LED bulbs?
Yes, the CLSI-C6MA supports LED dimming through leading-edge and trailing-edge control. Use bulbs specified as dimmable and ensure the total wattage does not exceed the maximum channel rating.
What is the maximum lamp load per channel?
Each of the six channels handles up to 800 watts at 120 V AC, which is approximately 6.6 amps for incandescent loads. Derate the load by 25% when driving electronic transformers or LED drivers.
Can I paint the faceplate to match my decor?
Yes, the faceplate is made of paintable plastic. Lightly sand the surface, apply a plastic primer, then spray with a compatible paint. Allow it to dry completely before snapping it onto the keypad module.
How do I program scenes on this controller?
Using SIMPL Windows, define six channel levels and scene presets in the iLux module. Assign scenes to the front panel buttons or trigger them via the Cresnet bus from a touchpanel or program.
Does the controller require a separate power supply?
The CLSI-C6MA is powered by the Cresnet bus at 24 VDC. A Crestron CNPWS-75 or similar supply is required, and you must ensure the total Cresnet power budget is not exceeded.
How do I reset the controller to factory defaults?
Disconnect the Cresnet power, press and hold the setup button on the rear of the unit, and reconnect power while keeping the button pressed for five seconds. This restores factory programming and IP settings.
Can I use a neutral wire for this controller?
Yes, the CLSI-C6MA requires a neutral connection for the internal power supply. If your wall box lacks a neutral wire, you must install a retrofit neutral kit or use a different compatible controller.
What type of wall box is needed for installation?
The controller fits a standard 2-gang US wall box. The depth must be at least 1.75 inches (44 mm) to accommodate the module and wiring.
How do I update the firmware of the iLux CLSI-C6MA?
Connect a PC with Crestron Toolbox to the Cresnet bus, then select 'Firmware' and 'Update' in the software. Follow the prompts to upload the latest firmware file from the Crestron website.
User questions about iLux CLSI-C6MA Crestron
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Controller in PDF format for free! Find your manual iLux CLSI-C6MA - Crestron and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. iLux CLSI-C6MA by Crestron.
USER MANUAL iLux CLSI-C6MA Crestron
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Crestron
Model : iLux CLSI-C6MA
Category : Controller