NMPRO-CMB3 - Flat Screen Mount Newstar - Free user manual and instructions
Find the device manual for free NMPRO-CMB3 Newstar in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | Flat screen mount |
| Brand | Newstar |
| Model | NMPRO-CMB3 |
| Compatible screen size | 32 to 55 inches |
| VESA patterns | 75x75, 100x100, 200x100, 200x200, 300x300, 400x400 mm |
| Maximum weight capacity | 35 kg |
| Mount type | Fixed low-profile wall mount with tilt |
| Tilt adjustment | -5 to +15 degrees |
| Level adjustment | ±3 degrees |
| Distance from wall | 22 mm |
| Material | Cold-rolled steel with black powder coating |
| Color | Black |
| Product weight | 2.5 kg |
| Product dimensions (W x H x D) | 320 x 350 x 22 mm |
| Box dimensions (W x H x D) | 425 x 475 x 65 mm |
| Power supply | No electrical connection required |
| Installation | Wall mounting with included screws and anchors |
| Included accessories | Mounting bracket, hardware kit, and instruction manual |
| Maintenance and cleaning | Wipe with a soft dry cloth; avoid abrasive liquids |
| Safety | For indoor use; install on solid walls only; keep screws tightened |
| Spare parts and repairability | Contact Newstar support for replacement screws and mounting hardware |
| General information | Free PDF manual available at notice-facile.com |
Frequently Asked Questions - NMPRO-CMB3 Newstar
What is the maximum screen size and weight for the Newstar NMPRO-CMB3?
The mount supports screens from 32 to 55 inches with a maximum weight of 35 kg. Always verify your TV weight before installation.
What VESA patterns are compatible?
The NMPRO-CMB3 fits VESA 75x75, 100x100, 200x100, 200x200, 300x300 and 400x400 mm. Measure the distance between the mounting holes on the back of your screen to confirm compatibility.
Can I install this mount on drywall, concrete or wood studs?
The included anchors are suitable for solid concrete and brick. For drywall, use wood studs and the provided screws. Do not rely on plaster alone.
Does the mount allow tilting and swiveling?
It provides tilt adjustment from -5 to +15 degrees to reduce glare, but it is not a full-motion mount, so it does not swivel left or right.
What is the distance between the TV and the wall?
The low-profile design keeps your screen at about 22 mm from the wall, giving a clean and compact installation.
Do I need special tools for installation?
You need a drill, a Philips screwdriver, a spirit level and a pencil. The mount comes with a hardware kit including screws, anchors and washers.
How should I clean and maintain the mount?
Wipe the mount with a soft dry cloth to remove dust. Do not use solvents, abrasive cleaners, or water near the mounting screws.
Is the NMPRO-CMB3 suitable for a corner installation?
No, this is a flat wall mount, not a tilting wall mount with swivel arms. It is designed to be mounted on a flat wall surface, not in a corner.
Are spare parts available for this mount?
Replacement screws, anchors and brackets can be ordered through Newstar support. The product manual also lists hardware sizes and part numbers.
Where can I download the instruction manual?
You can download the free PDF manual from notice-facile.com. The manual includes installation steps, safety instructions and a VESA compatibility chart.
User questions about NMPRO-CMB3 Newstar
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Flat Screen Mount in PDF format for free! Find your manual NMPRO-CMB3 - Newstar and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NMPRO-CMB3 by Newstar.
USER MANUAL NMPRO-CMB3 Newstar
NEOMOUNTS PRO
BY NEWSTAR
MENU BOARD CEILING MOUNT
This instruction is applicable to all the following models and related extended products
NMPRO-CMB1 (With tilt arms)
NMPRO-CMB2 (With tilt arms)
NMPRO-CMB3 (With tilt arms)
NMPRO-CMB4 (With tilt arms)
WARNING
- Be sure to read this entire manual thoroughly and you fully understand all the instructions and warning before attempting to begin your installation.
- This products should only be installed by someone who has a basic knowledge of building construction installations and fully undestnd these instructions.
• Always have someone assit you to lift and position your equipment. - Tighten screws and bolts firmly, but do not over tighten. Over tightening can damage the item and greatly reduce their ability to hold. Please refer to suggested torque values where applicable in these instructions.
Parts list (NMPRO-CMB1)
| A1 | A2 | A3 | A4 |
| M5X15 | M6X15 | M8X15 | ∅6X∅6.2X1.5 |
| X4 | X4 | X4 | X4 |
X1
| B1 | B2 | B3 | B4 | B5 | B6 |
| M8X12X5 | M8X50X1 | M8X60X2 | M6X85 ∅13X∅6.2X1.5X2 | ∅16X∅8.2X1.5X4 | X4 |
X1
| C1 | C2 |
| C3 | C4 | C5 | C6 |
| X2 | ∅16X∅8.2X1.5X4 | Lag boltX4 | AnchorX4 |
X1
| D1 | D2 | D3 |
 |  |  |
| X1 | 680mm*1 |
Parts list (NMPRO-CMB2)
| A1 | A2 | A3 | A4 |
| M5X15 | M6X15 | M8X15 | ∅6X∅6.2X1.5 |
| X4 | X4 | X4 | X4 |
X2
| B1 | B2 | B3 | B4 | B5 | B6 |
| M8X12X5 | M8X50X1 | M8X60X2 | M6X85 ∅16X∅6.2X1.5X2 | ∅13X∅8.2X1.5X4 | X4 |
X1
| C1 | C2 |
| X1 | 3&5mmX1 |
| C3 | C4 | C5 | C6 |
| X2 | ∅16X∅8.2X1.5X4 | Lag boltX4 | AnchorX4 |
X1
| D1 | D2 | D3 |
 |  |  |
| X1 | 1000mm*1+480mm*2 |
| D4 |
| X4 |
Parts list (NMPRO-CMB3)
| A1 | A2 | A3 | A4 |
| M5X15 | M6X15 | M8X15 | ∅6X∅6.2X1.5 |
| X4 | X4 | X4 | X4 |
X3
| B1 | B2 | B3 | B4 | B5 | B6 |
| M8X12X5 | M8X50X1 | M8X60X2 | M6X85 φ 13Xφ 6.2X1.5 X2 | φ 16Xφ 8.2X1.5 X4 |
X2
14
Height adjustment 10mm
12
Table of contents
Click a title to access it
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Newstar
Model : NMPRO-CMB3
Category : Flat Screen Mount