Live-5E - Unknown AIRLIVE - Free user manual and instructions
Find the device manual for free Live-5E AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Outdoor Wireless CPE / Access Point |
| Bandwidth | 5.8 GHz (802.11a/n) |
| Data rate | Up to 300 Mbps |
| Antenna | Integrated 23 dBi directional antenna |
| Ethernet port | 1 x 10/100BASE-TX with PoE |
| Power method | 24V passive PoE (adapter included) |
| Wireless modes | AP, Client, WDS Bridge, Repeater |
| Security | WEP, WPA/WPA2 PSK, MAC filtering |
| Mounting | Outdoor pole mounting kit |
| Weatherproof rating | IP65 water- and dust-proof enclosure |
| Surge protection | Built-in lightning and ESD protection |
| Management | Web-based GUI via HTTP/HTTPS |
| Dimensions | 260 x 210 x 95 mm |
| Weight | 1.9 kg |
| Operating temperature | -30°C to 70°C |
| Operating humidity | 10% – 90%, non-condensing |
| Compliance | CE, FCC, RoHS |
| Recommended usage | Point-to-point bridging, last-mile access, video surveillance backhaul |
| Package contents | Live-5E unit, PoE injector, mounting bracket, quick guide |
| Warranty | 1 year limited |
Frequently Asked Questions - Live-5E AIRLIVE
How do I reset the Live-5E to factory defaults?
Press and hold the reset button on the device for about 10 seconds while it is powered on. The unit will reboot and restore the default factory settings. Use a paper clip or similar tool.
What is the default IP address and login for the AirLive Live-5E?
The default IP address is typically 192.168.1.100 and the default username/password are both admin (or blank). Check the label on the device or the quick guide. If you cannot access it, reset the unit to defaults.
Can the Live-5E be used as a wireless bridge between two buildings?
Yes, the Live-5E supports WDS Bridge and Client modes. To bridge two locations, set one unit as Access Point and the other as Client, and make sure they share the same SSID, channel and security key. Alignment is important since the antenna is directional.
How do I power the Live-5E outdoors?
The device is powered by 24V passive PoE through the Ethernet cable. Use the included PoE injector indoors: connect the LAN port of the injector to your switch, and the PoE port to the Live-5E. The maximum cable length for a stable connection is 100 meters.
What should I do if the wireless signal is weak or the link speed is low?
Check that the antennas are properly aligned and there are no obstacles such as trees or buildings. Make sure the distance is within the product's rated range. Try to reduce interference by choosing a clean channel and lowering the channel width to 20 MHz. Also verify that both devices are using the same security settings and are not overloaded.
Does the Live-5E support WPA2 encryption?
Yes, the Live-5E supports both WPA and WPA2 with AES/TKIP. It is strongly recommended to use WPA2-AES for maximum security. Avoid using WEP unless you need compatibility with very old equipment.
Can I use the Live-5E as a regular Wi-Fi access point for indoor use?
It is designed for outdoor environments, but it can be used indoors as a standard Access Point. However, its high-gain directional antenna is best suited for point-to-point or point-to-multipoint links; for a normal indoor coverage zone, an omni-directional AP is usually more practical.
How can I update the firmware of the Live-5E?
Download the latest firmware from the AirLive support site. Log into the web interface, go to System Maintenance → Firmware Upgrade, select the downloaded file and click Upgrade. Do not disconnect the power during the upgrade.
What is the maximum throughput I can expect from the Live-5E?
In ideal conditions, the 802.11n link can reach a raw data rate of 300 Mbps, but the real TCP/IP throughput is usually around 150-200 Mbps depending on distance, interference, and local radio regulations. Use a wired connection for final testing.
How do I align the antenna for the best signal strength?
The Live-5E uses a directional antenna. Use the signal strength indicator in the web interface or a smartphone app to monitor RSSI. Adjust the vertical and horizontal angle in small steps (1-2 degrees) while watching the signal bars. Tighten the mounting bolts once you find the strongest signal.
User questions about Live-5E AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Unknown in PDF format for free! Find your manual Live-5E - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Live-5E by AIRLIVE.
USER MANUAL Live-5E AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : Live-5E
Category : Unknown