MC-10GSFP+ - Unknown AIRLIVE - Free user manual and instructions
Find the device manual for free MC-10GSFP+ AIRLIVE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 10G SFP+ Media Converter |
| Ports | 1 x 10G SFP+ slot, 1 x 10GBase-T RJ-45 |
| Data Rate | 10 Gbps |
| Standards | IEEE 802.3an, IEEE 802.3ae |
| Power Input | DC 5V, 2A |
| Power Consumption | < 10W |
| Dimensions | 100 x 75 x 25 mm |
| Weight | 200 g |
| Housing | Metal |
| LED Indicators | Power, Link/Act, SFP |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -10°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Installation | Desktop, wall-mountable |
| Compatibility | Standard 10G SFP+ modules and 10GBase-T devices |
| Transmission Distance | Up to 100m (copper); depends on SFP+ module (fiber) |
| Safety Certifications | CE, FCC |
| Cleaning | Use a dry, soft cloth |
| Repairability | No user-serviceable parts; contact support |
| General Information | Plug-and-play, no configuration required |
Frequently Asked Questions - MC-10GSFP+ AIRLIVE
What is the AirLive MC-10GSFP+ used for?
It converts a 10G SFP+ fiber connection to a 10GBase-T copper connection, allowing you to connect fiber optic networks to copper-based devices.
How do I connect the MC-10GSFP+?
Plug the SFP+ module into the SFP+ slot and connect the fiber cable. Connect the RJ-45 port to your copper 10G device using a CAT6a or CAT7 cable. Then plug in the power adapter.
Which SFP+ modules are compatible?
The MC-10GSFP+ supports standard 10G SFP+ modules, including 10GBASE-SR, 10GBASE-LR, and 10GBASE-T. Ensure the module matches your network type.
Does the MC-10GSFP+ require configuration?
No, it is plug-and-play. It automatically negotiates speed and duplex mode.
What is the maximum transmission distance?
Over copper, up to 100 meters. Over fiber, the distance depends on the SFP+ module, ranging from 300m to 80km.
Can I use the MC-10GSFP+ outdoors?
The operating temperature is 0°C to 50°C, and it is designed for indoor use. If outdoor use is needed, protect it in a weatherproof enclosure.
Why is the link LED not lighting up?
Check if both ends are powered, cables are properly connected, and the SFP+ module is fully inserted. Also verify that the remote device is compatible and active.
How do I clean and maintain the device?
Use a dry, soft cloth to wipe the exterior. Do not use liquids or abrasive cleaners. Keep the vents unobstructed and avoid dust.
Does the MC-10GSFP+ support jumbo frames?
Yes, it typically supports jumbo frames up to 9KB, but check your network settings for optimal performance.
What should I do if the device gets too hot?
Ensure proper ventilation. Do not stack multiple devices and keep at least 5cm clearance around the unit. If overheating persists, reduce network load or move to a cooler environment.
User questions about MC-10GSFP+ AIRLIVE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Unknown in PDF format for free! Find your manual MC-10GSFP+ - AIRLIVE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MC-10GSFP+ by AIRLIVE.
USER MANUAL MC-10GSFP+ AIRLIVE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIRLIVE
Model : MC-10GSFP+
Category : Unknown