SPB517 - Switch HAGER - Free user manual and instructions
Find the device manual for free SPB517 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hager |
| Model | SPB517 |
| Product Type | Switch |
| Mounting | Flush-mounted |
| Dimensions | 55 x 55 x 22 mm |
| Weight | 0.05 kg |
| Rated Voltage | 250 V AC |
| Rated Current | 10 A |
| Number of Gangs | 1 |
| Number of Poles | 1 |
| Switch Function | On/Off |
| Material | Polycarbonate |
| Color | White |
| IP Rating | IP20 |
| Operating Temperature | -5°C to +40°C |
| Maintenance | Wipe clean with dry cloth |
| Cleaning | Avoid abrasive cleaners |
| Safety | Double insulated |
| Spare Parts | Not applicable |
| Repairability | Non-serviceable, replace unit |
| Standards | IEC 60669-1 |
Frequently Asked Questions - SPB517 HAGER
What is the Hager SPB517 switch used for?
The Hager SPB517 is a single-gang on/off switch used for controlling lighting circuits in residential and commercial installations. It provides a simple make/break switching function.
What are the electrical ratings of the SPB517?
It is rated for 250V AC and 10A, making it suitable for standard lighting loads up to 2400W. Always check the connected load before installation.
Can the SPB517 be used for two-way switching?
No, this model is a single-pole switch and is not designed for two-way or intermediate switching. For two-way circuits, you need a two-way switch (e.g., SPB527).
How do I wire the SPB517?
After switching off the mains, connect the live wire to the terminal marked L and the switched live to terminal 1. Ensure connections are tight and the switch is secured into the backbox.
Is the SPB517 compatible with LED lighting?
Yes, it is compatible with LED lighting as it is a mechanical switch. However, for very low loads, the inrush current may cause issues; check LED driver specifications.
How should I clean the switch?
Use a soft, dry cloth to wipe the surface. Do not use water, solvents, or abrasive cleaners, as they may damage the polycarbonate material.
Does the switch require a backbox for installation?
Yes, it fits into a standard 35mm deep wall backbox with an 60mm fixing centre. The backbox provides safe housing for the connections.
Is the SPB517 suitable for outdoor use?
No, it has an IP20 rating, indicating protection against touch only. It must be installed indoors or within a weatherproof enclosure if used outside.
What is the warranty length for the SPB517?
Hager provides a 2-year warranty covering manufacturing defects. Keep your receipt and contact your retailer or Hager support for any claims.
Can I replace the rocker of the SPB517 separately?
The rocker is not a replaceable spare part. If damaged, the entire switch unit must be replaced to ensure safety and continued compliance.
User questions about SPB517 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual SPB517 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPB517 by HAGER.
USER MANUAL SPB517 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : SPB517
Category : Switch