SPB117 - Switch HAGER - Free user manual and instructions
Find the device manual for free SPB117 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hager |
| Model | SPB117 |
| Product Type | Switch |
| Series | P-line |
| Operation | Rocker switch |
| Number of Gangs | 1 |
| Switching Type | Single-pole |
| Rated Voltage | 230 V AC, 50 Hz |
| Rated Current | 10 A |
| Material | Polycarbonate (thermoplastic) |
| Dimensions (H x W x D) | 55 x 55 x 33 mm |
| Weight | 0.08 kg |
| Mounting | Flush-mounted |
| Degree of Protection | IP20 |
| Connection Type | Screw terminals |
| Terminal Capacity | 2 x 2.5 mm² |
| Standard Compliance | EN 60669-1 |
| Cleaning | Wipe with a dry cloth |
| Safety | Insulated front, IP20 |
| Spare Parts | Available (rocker, terminal block) |
| Repairability | Modular, replaceable parts |
| Color | White |
Frequently Asked Questions - SPB117 HAGER
How to install the switch?
Turn off the mains power before installation. Connect the phase wire to the common terminal (L) and the switched line to the other terminal. Secure the mechanism in the flush-mounted box. Always follow the wiring diagram provided in the manual.
What is the maximum load?
The maximum load is 10 A at 230 V AC, corresponding to approximately 2300 W for resistive loads. Derate for inductive or LED loads to avoid damage.
Is it compatible with LED bulbs?
Yes, it is compatible with LED bulbs, but you must ensure the total load does not exceed 10 A. For capacitive or electronic LED drivers, add a compatible power relay or at least check for inrush current.
How to clean and maintain the switch?
Use a dry or slightly damp cloth to wipe the surface. Do not use aggressive solvents or abrasive cleaners. Check regularly for loose connections and tighten screws if necessary.
Can this switch be used for a two-way (staircase) circuit?
No, the SPB117 is a single-pole switch. For two-way switching, you need a changeover switch (e.g., Hager SPB100) and a companion switch at the other location.
What safety precautions should I follow?
Always disconnect the power supply before installation or maintenance. Verify that the wires are correctly insulated and fixed securely. Ensure the switch is installed in a IP20 rated indoor environment.
Are spare parts available?
Yes, Hager offers spare parts such as rockers, terminal blocks, and mounting frames. Contact your local dealer or Hager customer service for the exact parts.
What is the warranty period?
Hager provides a limited warranty of typically 2 years from the date of purchase. Keep your receipt and register the product if required.
Can I use this switch outdoors?
No, it has an IP20 rating, which means it is only suitable for indoor use where there is no risk of water or dust penetration. For outdoor use, select an IP65-rated switch.
How do I know if this switch fits my standard mounting box?
The SPB117 is designed for flush-mounted boxes with a standard 55 mm diameter. Check the mounting box depth (at least 40 mm) and ensure screws align with the mounting holes.
User questions about SPB117 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual SPB117 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SPB117 by HAGER.
USER MANUAL SPB117 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : SPB117
Category : Switch