WGCR112 - Switch HAGER - Free user manual and instructions
Find the device manual for free WGCR112 HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Hager |
| Model | WGCR112 |
| Product Type | Light Switch |
| Mounting Type | Flush-mounted |
| Number of Gangs | 1 |
| Number of Ways | 2-way |
| Actuation Type | Rocker |
| Dimensions (W x H x D) | 71 x 71 x 37 mm |
| Weight | 0.09 kg |
| Rated Voltage | 250 V AC |
| Frequency | 50/60 Hz |
| Rated Current | 10 A |
| Maximum Load | 2500 W |
| Material | Thermoplastic |
| Colour | White |
| IP Rating | IP20 |
| Terminal Capacity | Up to 2.5 mm² |
| Operating Temperature | 0 °C to +35 °C |
| Certification | CE, NF |
| Spare Parts Available | Yes (rocker, frame, mechanism) |
| Repairability | Modular design for easy replacement |
| Recommended Use | Indoor lighting circuits |
| Cleaning and Maintenance | Wipe with a soft dry cloth; do not use aggressive agents |
| Safety Instructions | Disconnect power before installation; keep away from moisture |
Frequently Asked Questions - WGCR112 HAGER
Is the Hager WGCR112 compatible with standard wall boxes?
Yes, the Hager WGCR112 switch is designed to fit standard flush-mounting boxes with a diameter of 60 mm or screw spacing of 60 mm. Use the supplied mounting frame for a secure fit.
What type of load can I control with this switch?
It is rated for 10 A and 250 V AC, allowing control of resistive loads such as incandescent lights, LED drivers and small appliances up to 2500 W. For inductive loads like fans, ensure they do not exceed the rated current.
Is the WGCR112 a dimmer?
No, the WGCR112 is a standard ON/OFF switch, not a dimmer. For dimming capabilities, you need a dimmer module compatible with your bulb type (LED, halogen, etc.).
Can I use it as a two-way switch?
Yes, it supports 2-way switching when paired with another compatible switch, allowing you to control one light from two different locations.
How do I clean the switch?
Clean the switch with a soft dry cloth to remove dust. Avoid using water or solvent-based cleaners, which may damage the plastic surfaces or the internal mechanism.
What are the recommended tightening torques for the terminals?
Tighten the terminal screws to a torque of 0.5 N·m to ensure a reliable connection without damaging the conductor or the clamping plate.
Does it come with a warranty?
Hager offers a 2-year standard warranty on the WGCR112, covering material and manufacturing defects. Check your local dealer for specific warranty conditions.
Can I replace just the rocker if it gets damaged?
Yes, the rocker is a spare part that clips off and can be replaced individually. Hager sells rockers separately in various colours to match your décor.
Is the switch suitable for exterior use?
No, the WGCR112 has an IP20 rating, meaning it offers only basic protection against solid objects larger than 12 mm and no water protection. It must be installed indoors in a dry location.
What is the maximum conductor size that can be connected?
The terminals accept conductors up to 2.5 mm² for solid or stranded wires. Use a ferrule for fine stranded wires to prevent damage during tightening.
User questions about WGCR112 HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual WGCR112 - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WGCR112 by HAGER.
USER MANUAL WGCR112 HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : WGCR112
Category : Switch