WGCXL131PKB - Switch HAGER - Free user manual and instructions
Find the device manual for free WGCXL131PKB HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall Switch |
| Brand | Hager |
| Model | WGCXL131PKB |
| Category | Electrical Switch |
| Mounting Type | Flush-mounted |
| Color | Black (PKB finish) |
| Material | Thermoplastic |
| Rated Voltage | 230 V AC |
| Rated Current | 10 A |
| Number of Gangs | 1-gang |
| Actuation Type | Rocker switch |
| Ingress Protection | IP20 |
| Insulation Class | Class II |
| Certification | CE marked |
| Compliance Standards | IEC 60669-1 |
| Operating Temperature | -5°C to +40°C |
| Dimensions (H x W x D) | 71 x 71 x 36 mm |
| Weight | 85 g |
| Terminal Capacity | Screw terminals for 1.5–2.5 mm² wires |
| Mechanical Endurance | 20,000 cycles |
| Maintenance | Wipe with a dry cloth; no solvents |
| Spare Parts & Repairability | Replacement rocker and frame available |
| Warranty | 2 years |
Frequently Asked Questions - WGCXL131PKB HAGER
How do I wire the Hager WGCXL131PKB switch?
Connect the live wire (brown) to the L terminal and the load wire (blue or black) to the other terminal. Ensure the power is off before installation. Use a voltage tester to confirm no current is present.
Can this switch be used for dimming?
No, the WGCXL131PKB is a standard on/off rocker switch. It is not designed for dimming. Use a dedicated dimmer switch for adjustable lighting.
Is the WGCXL131PKB compatible with LED bulbs?
Yes, it works with LED bulbs as long as the total load does not exceed 10 A. However, for mixed loads or low-wattage LEDs, ensure compatibility with your specific lighting setup.
What is the IP rating and is it waterproof?
The switch has an IP20 rating, meaning it is not waterproof. It should be installed indoors, away from moisture, unless placed inside a waterproof enclosure.
How do I clean the switch?
Use a dry or slightly damp soft cloth to wipe the surface. Avoid abrasive cleaners, solvents, or wet cloths that could cause electric shock or damage the finish.
Can I install this switch myself?
If you have basic electrical knowledge and follow local codes, you can replace an existing switch. However, we recommend hiring a licensed electrician for new installations or if you are unsure.
What are the dimensions of the WGCXL131PKB?
The switch measures 71 x 71 x 36 mm (height x width x depth). It is designed for standard flush-mounted wall boxes.
Does this switch require a neutral wire?
No, the WGCXL131PKB is a simple two-wire switch and does not require a neutral wire. Only the live and switched live connections are needed.
Is the switch suitable for outdoor use?
Only if installed in a suitable IP-rated enclosure. The switch itself is rated IP20 and is intended for dry indoor locations.
What is the warranty period?
Hager offers a 2-year warranty against manufacturing defects. This does not cover misuse or improper installation.
User questions about WGCXL131PKB HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual WGCXL131PKB - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WGCXL131PKB by HAGER.
USER MANUAL WGCXL131PKB HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : WGCXL131PKB
Category : Switch