FWU73S - Switch HAGER - Free user manual and instructions
Find the device manual for free FWU73S HAGER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Single-pole electrical switch |
| Brand | Hager |
| Model | FWU73S |
| Category | Wall switch |
| Mounting | Flush mounting |
| Dimensions | 80 x 80 x 30 mm (approx.) |
| Weight | 0.1 kg |
| Rated Voltage | 230 V AC |
| Rated Current | 10 A |
| Frequency | 50/60 Hz |
| Number of Poles | 1 |
| Switch Function | On/Off |
| Terminal Capacity | 2.5 mm² wires |
| Material | Polycarbonate (flame retardant) |
| Colour | White |
| Ingress Protection | IP20 |
| Standards | IEC 60669-1 |
| Safety Class | Class I |
| Operating Temperature | -5°C to +40°C |
| Maintenance | Wipe with dry cloth |
| Spare Parts | Available (rocker, frame, grid) |
| Repairability | Yes, modular design |
| General Information | Indoor use only |
Frequently Asked Questions - FWU73S HAGER
What is the Hager FWU73S switch used for?
The Hager FWU73S is a single-pole switch designed to control lighting or other resistive loads up to 10 A at 230 V AC.
Can I use the FWU73S for three-way switching?
No, the FWU73S is a single-pole switch. For three-way switching, you need a two-way switch or an intermediate switch in a multi-way circuit.
What is the maximum load rating of the FWU73S?
The maximum load rating is 10 A at 230 V AC. When using LED or CFL lamps, verify the driver compatibility and ensure the total load stays within the rating.
How do I mount the Hager FWU73S?
It is designed for flush mounting in a standard 60 mm recessed box. Connect the phase wire to the L terminal and the switched phase to the load terminal, then fix the switch frame.
Is the FWU73S suitable for outdoor use?
No, the switch has an IP20 rating, meaning it is only protected against solid objects larger than 12 mm and is not water-resistant. Use it indoors only.
How do I connect wires to the FWU73S?
Strip the wire insulation to 8 mm, insert the wire into the terminal hole, and tighten the screw securely. The terminal accepts wires up to 2.5 mm².
Does the FWU73S require a neutral wire?
No, it is a single-pole switch and only requires the phase wire and a switched phase wire to the load. No neutral connection is needed.
Will the FWU73S work with LED bulbs?
Yes, the switch is compatible with LED bulbs as long as the total LED load does not exceed the switch's 10 A rating. For best compatibility, follow the LED manufacturer's guidelines.
How do I clean the FWU73S?
Clean the switch with a soft, dry cloth. Avoid using water, abrasive cleaners, or solvents, as they may damage the surface or affect electrical safety.
What is the warranty period for the Hager FWU73S?
Hager typically offers a 2-year warranty on this product. Check the local dealer or official Hager documentation for specific warranty terms and conditions.
User questions about FWU73S HAGER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Switch in PDF format for free! Find your manual FWU73S - HAGER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FWU73S by HAGER.
USER MANUAL FWU73S HAGER
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HAGER
Model : FWU73S
Category : Switch