DHP482JX14 - Drill MAKITA - Free user manual and instructions
Find the device manual for free DHP482JX14 MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Hammer Drill |
| Brand | Makita |
| Model | DHP482JX14 |
| Power Source | 18 V Li-ion battery |
| Battery Compatibility | Makita 18V LXT series |
| Chuck Type | 13 mm keyless chuck |
| Maximum Torque | 62 Nm (hard joint) |
| No-Load Speed (Low / High) | 0-500 / 0-2,000 rpm |
| Impact Rate (Low / High) | 0-7,500 / 0-28,500 bpm |
| Drilling Capacity (Wood / Steel) | 40 mm / 13 mm |
| Drilling Capacity (Masonry) | 16 mm |
| Number of Gears | 2 |
| Weight (including battery) | 1.7 kg |
| Dimensions (L x W x H) | 250 x 80 x 230 mm (approx.) |
| LED Work Light | Yes |
| Variable Speed Trigger | Yes |
| Reversible Rotation | Yes |
| Safety Features | Electric brake, overload protection |
| Supplied with | 2 batteries, charger, case |
| Maintenance | Clean ventilation slots regularly; replace carbon brushes when worn |
| Cleaning | Wipe with a dry cloth; do not use solvents |
| Spare Parts | Available from authorised Makita service centres |
| Repairability | Carbon brushes are replaceable; motor can be serviced |
| General Information | Part of Makita's 18V LXT range with high performance |
Frequently Asked Questions - DHP482JX14 MAKITA
How do I change the drill bit on the Makita DHP482JX14?
To change the bit, first ensure the drill is off. Rotate the chuck counter-clockwise to open the jaws, insert the bit, then rotate clockwise to tighten. The keyless chuck allows quick changes without a separate key.
What is the maximum drilling capacity of this drill?
The DHP482JX14 can drill up to 40 mm in wood, 13 mm in steel, and 16 mm in masonry. These capacities depend on the material and bit quality.
How do I select the torque setting?
Rotate the torque adjustment ring located behind the chuck. Numbers 1-21 set the tightening torque, while the drill symbol selects drilling mode. For screwdriving, choose a low setting; for drilling, use the drill icon.
Can I use this drill for masonry work?
Yes, the DHP482JX14 has a hammer mode. Slide the mode selector to the hammer drill icon to activate impact drilling. Use a masonry bit and apply steady pressure.
How long do the batteries take to charge?
The included charger charges a 3.0Ah battery in about 30-45 minutes. The exact time depends on the battery temperature and condition. The charger has an LED indicator that shows charging status.
How can I change the carbon brushes?
Carbon brushes are located on the motor. To access them, unscrew the brush holder caps on the sides of the motor housing. Replace worn brushes with genuine Makita brushes to maintain performance. It's recommended to have this done by a service center if unsure.
What safety precautions should I take when using the drill?
Always wear safety goggles and ear protection. Use the auxiliary handle for heavy drilling. Keep the drill away from water and rain. Disconnect the battery before changing accessories. Ensure the chuck is tight before operation.
Does the drill have a hammer function?
Yes, the drill features a hammer mechanism that delivers impact action for drilling into concrete, brick, and stone. Switch between drilling and hammer drilling using the mode selector lever.
How do I maintain the drill for long life?
Keep the ventilation slots clean with dry compressed air. Wipe the exterior with a soft damp cloth. Regularly inspect carbon brushes and replace when worn. Store the drill in a dry, clean case. Check the chuck tightness occasionally.
What is included in the DHP482JX14 kit?
The kit typically includes the drill body, two 18V 3.0Ah batteries, a charger, a side handle, a carry case, and an instruction manual. It may include a driver bit and a depth gauge.
User questions about DHP482JX14 MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual DHP482JX14 - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DHP482JX14 by MAKITA.
USER MANUAL DHP482JX14 MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : DHP482JX14
Category : Drill