BDF440RFX - Drill MAKITA - Free user manual and instructions
Find the device manual for free BDF440RFX MAKITA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Drill/Driver |
| Brand | Makita |
| Model | BDF440RFX |
| Voltage | 14.4 V |
| Chuck Size | 13 mm (1/2") keyless chuck |
| No Load Speed | Low: 0-400 rpm / High: 0-1,300 rpm |
| Torque Settings | 15+1 positions |
| Max Torque | 42 Nm |
| Battery Type | Li-Ion |
| Battery Capacity | 3.0 Ah |
| Charger | Rapid charger included |
| Weight (with battery) | 1.8 kg |
| Dimensions | 240 x 67 x 220 mm (approx.) |
| LED Job Light | Yes |
| Two-Speed Gearbox | Yes |
| Belt Clip | Yes |
| Spare Parts Availability | Available via authorized Makita service centers |
| Maintenance | Keep air vents clear; wipe with a dry cloth after use |
| Safety Features | Overload protection, electric brake |
Frequently Asked Questions - BDF440RFX MAKITA
How do I change the drill bit?
To change the bit, rotate the keyless chuck counterclockwise to open it, insert the bit, then tighten by rotating clockwise until secure.
How do I adjust the torque?
Rotate the torque adjusting ring to one of the 15+1 settings. Lower numbers provide less torque for driving small screws, while higher numbers are for heavy bolting.
What voltage is the battery?
This drill uses a 14.4V Li-Ion battery. Check that the battery is compatible with the BDF440RFX model.
How long does it take to charge the battery?
With the included rapid charger, a fully depleted battery charges in approximately 30 minutes.
Can I use this drill for driving screws?
Yes, the BDF440RFX is a drill/driver. Insert a screwdriver bit into the chuck and select the appropriate torque setting to avoid damaging the screw or workpiece.
How do I reverse the rotation?
Use the direction switch located above the trigger. Slide it to the right for forward rotation and to the left for reverse.
What maintenance does the drill require?
After each use, wipe the tool with a dry cloth. Keep the ventilation slots clear of dust and debris. Periodically check the carbon brushes for wear.
Is this drill compatible with 18V Makita batteries?
No, the BDF440RFX is designed for 14.4V batteries only. Using an 18V battery can damage the tool and voids the warranty.
How do I select low or high speed?
Slide the two-speed gearbox switch located on top of the drill. Position 1 is low speed (0-400 rpm) for high torque, and position 2 is high speed (0-1,300 rpm) for drilling.
Where can I get spare parts?
Spare parts are available from Makita authorized service centers. Visit the official Makita website to find a service center near you.
User questions about BDF440RFX MAKITA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Drill in PDF format for free! Find your manual BDF440RFX - MAKITA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BDF440RFX by MAKITA.
USER MANUAL BDF440RFX MAKITA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : MAKITA
Model : BDF440RFX
Category : Drill