EWE361KB-DWB6 - Water heater ELECTROLUX - Free user manual and instructions
Find the device manual for free EWE361KB-DWB6 ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Brand | Electrolux |
| Model | EWE361KB-DWB6 |
| Installation Type | Wall-mounted |
| Tank Capacity | 36 Litres |
| Power Source | Electric |
| Rated Power | 3500 Watts |
| Voltage / Frequency | 220-240 V / 50-60 Hz |
| Maximum Water Temperature | 75°C (adjustable) |
| Adjustable Thermostat | Yes |
| Maximum Pressure | 0.8 MPa |
| Water Connection Size | 1/2 inch BSP |
| Heating Element | Copper / Stainless Steel |
| Tank Material | Steel with enamel lining |
| Insulation | Polyurethane foam |
| Pressure Relief Valve | Included |
| Thermal Cut-off | Included |
| Safety Certification | CE, SAA approvals |
| Maintenance Requirement | Flush and descale regularly |
| Spare Parts Availability | Heating element, thermostat, anode |
Frequently Asked Questions - EWE361KB-DWB6 ELECTROLUX
How do I install the Electrolux EWE361KB-DWB6 water heater?
Installation should be carried out by a certified technician. Ensure the unit is mounted on a wall that can support its weight, with proper clearance. Connect to water supply and power according to the manual.
What is the recommended maintenance schedule?
Perform a tank flush every 6 months and inspect the heating element and anode annually. Refer to the manual for detailed instructions.
How do I adjust the water temperature?
Use the thermostat control dial on the front panel. Turn to the desired setting, typically between 30°C and 75°C.
What safety features are included?
The heater is equipped with a pressure relief valve, thermal cut-off to prevent overheating, and a safety thermostat.
Can I use it in hard water areas?
Yes, but regular descaling is recommended to prevent scale buildup. You may install a water softener for better performance.
How do I drain the water heater?
Turn off power and water supply, open the pressure relief valve, and connect a hose to the drain valve at the bottom. Open the valve and let the water flow out.
What is the heating capacity? How long does it take to heat?
For a 36L tank, heating time from cold to 75°C is approximately 20-30 minutes depending on inlet temperature and power rating.
Is the tank resistant to corrosion?
The inner tank is coated with enamel and features a magnesium anode to protect against corrosion.
What should I do if the water is not heating?
Check the power supply and the thermostat setting. If they are fine, the heating element may be faulty and should be tested by a technician.
Where can I purchase spare parts?
Spare parts such as heating elements, thermostats, and anodes are available from Electrolux service centers or authorized retailers.
User questions about EWE361KB-DWB6 ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual EWE361KB-DWB6 - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EWE361KB-DWB6 by ELECTROLUX.