EWE361KB-DWG6 - Water heater ELECTROLUX - Free user manual and instructions
Find the device manual for free EWE361KB-DWG6 ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Water Heater |
| Model | EWE361KB-DWG6 |
| Brand | Electrolux |
| Capacity | 36 Gallons (136 Liters) |
| Rated Power | 4500 W (Dual Elements) |
| Voltage / Frequency | 240 V / 60 Hz |
| Maximum Temperature | 140°F (60°C) |
| Energy Efficiency | UEF 0.95 (Tier 2 Compliant) |
| Dimensions (H x W x D) | 48 x 18 x 18 inches (122 x 46 x 46 cm) |
| Weight (Empty) | 120 lbs (54 kg) |
| Water Connections | 3/4 inch NPT |
| Recovery Rate (90°F Rise) | 41 GPH (155 L/h) |
| Safety Features | T&P Relief Valve, Thermal Cut-off, Thermostat |
| Anode Rod | Powered Anode Rod (Corrosion Protection) |
| Insulation | 2 inch R-Value 16 Foam |
| Control Type | Top Mounted Thermostat (Adjustable) |
| Heating Elements | Two 4500W Stainless Steel Screw-in Elements |
| Installation | Indoor, Floor Mounted, Vertical |
| Warranty | 6 Years (Tank), 1 Year (Parts) |
Frequently Asked Questions - EWE361KB-DWG6 ELECTROLUX
What size water heater do I need for a family of 4?
The EWE361KB-DWG6 with 36 gallons is suitable for a family of up to 4, providing enough hot water for simultaneous showers and appliances.
How do I adjust the temperature on my Electrolux water heater?
Locate the thermostat access panel on the top of the unit. Use a screwdriver to adjust the temperature dial. Recommended setting is 120°F (49°C) for safety and energy savings.
Why is my water heater making a rumbling noise?
Rumbling often indicates sediment buildup at the bottom of the tank. Drain a few gallons periodically to flush out debris. If noise persists, consider professional maintenance.
How do I know if the heating element is bad?
Signs include inadequate hot water, tripping circuit breaker, or water not getting hot. You can test the element with a multimeter for continuity. Replace if faulty.
What is the anode rod and do I need to replace it?
The anode rod prevents corrosion inside the tank. Check it every 2-3 years; if it's heavily depleted or coated with calcium, replace it to extend the heater's life.
How do I drain my water heater for maintenance?
Turn off power, attach a hose to the drain valve at the bottom, open a hot water faucet, then open the valve. Flush until water runs clear. Close valve and refill before restoring power.
Is the temperature and pressure relief valve important?
Yes, the T&P valve is a critical safety device that releases pressure if water temperature exceeds 210°F or pressure exceeds 150 psi. Test it annually by lifting the lever briefly.
Can I install this water heater myself?
While possible, professional installation is recommended due to electrical, plumbing, and safety codes. Improper installation can void warranty and create hazards.
How can I improve energy efficiency of my water heater?
Lower the thermostat to 120°F, insulate the first few feet of hot water pipes, and install a timer to reduce standby losses. Regular maintenance also helps.
What does the error code indicate if the pilot light is out?
This model does not have a pilot light; it is electric. If power is on but no heat, check the circuit breaker or high limit switch. Consult manual for troubleshooting.
User questions about EWE361KB-DWG6 ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual EWE361KB-DWG6 - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EWE361KB-DWG6 by ELECTROLUX.
USER MANUAL EWE361KB-DWG6 ELECTROLUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTROLUX
Model : EWE361KB-DWG6
Category : Water heater