EWH50SIEEC - Water heater ELECTROLUX - Free user manual and instructions
Find the device manual for free EWH50SIEEC ELECTROLUX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Storage Water Heater |
| Brand | Electrolux |
| Model | EWH50SIEEC |
| Capacity | 50 liters (approx. 13.2 gallons) |
| Dimensions (H x W x D) | 850 x 450 x 450 mm (approx.) |
| Weight (empty) | 22 kg (approx.) |
| Power Supply | 220-240 V ~ 50 Hz |
| Power Consumption | 2000 W |
| Energy Efficiency Class | C (EU scale) |
| Tank Material | Enamel-coated steel |
| Insulation Material | Polyurethane foam |
| Max Water Temperature | 75 °C |
| Safety Features | Thermal cut-off, pressure relief valve, anti-corrosion anode |
| Installation Type | Wall-mounted (horizontal or vertical) |
| Control Type | Mechanical thermostat with knob |
| Heating Element | Copper-sheathed immersion element |
| Warranty | 2 years (parts and labor) |
| Standby Heat Loss | < 45 kWh/24h (approx.) |
| Water Connection | G 1/2 inch inlet and outlet |
| Maximum Pressure | 6 bar (87 psi) |
Frequently Asked Questions - EWH50SIEEC ELECTROLUX
How do I install the Electrolux EWH50SIEEC water heater?
Installation should be performed by a qualified technician. The unit must be wall-mounted on sturdy brackets, connected to cold water supply, and wired to a dedicated 220-240V circuit with proper grounding.
How do I set the desired water temperature?
Turn the thermostat knob on the front panel. The temperature range is typically from 30°C to 75°C. A setting of 60°C is recommended for normal use to balance energy savings and hot water availability.
What maintenance does the water heater require?
Periodically check the pressure relief valve for proper operation. Every 6-12 months, drain a few liters to remove sediment. The magnesium anode should be inspected and replaced every 2-3 years to prevent corrosion.
How do I drain the water heater?
Turn off power and water supply. Connect a hose to the drain valve at the bottom, open a hot water tap to allow air in, then open the drain valve. Direct water to a drain.
Why is water not heating?
Check if the power switch is on, the circuit breaker hasn't tripped, and the thermostat is set above ambient temperature. If still not heating, the thermostat or heating element may be faulty.
Water leaks from the pressure relief valve: is this normal?
Slight dripping during heating cycles is normal. Continuous or heavy leakage indicates excessive pressure or a faulty valve. Contact a technician to inspect the system.
How can I save energy with my water heater?
Set thermostat to 55-60°C, insulate hot water pipes, and use less hot water (shorter showers, cold wash cycles). Consider installing a timer to heat only during off-peak hours.
The water heater makes noise: what could be the cause?
Sediment buildup can cause popping or rumbling sounds when heating. Drain the tank to remove sediment. If noise persists, check for loose mounting or scaling on the heating element.
What is the warranty period?
The EWH50SIEEC typically comes with a 2-year warranty covering manufacturing defects. Registration may be required. Contact Electrolux support for details.
Can I use an extension cord?
No. The water heater must be directly connected to a dedicated circuit with proper rating. Extension cords pose fire and electric shock hazards.
User questions about EWH50SIEEC ELECTROLUX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Water heater in PDF format for free! Find your manual EWH50SIEEC - ELECTROLUX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EWH50SIEEC by ELECTROLUX.
USER MANUAL EWH50SIEEC ELECTROLUX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTROLUX
Model : EWH50SIEEC
Category : Water heater