EPL-8000 - Network Equipment Planet - Free user manual and instructions
Find the device manual for free EPL-8000 Planet in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | 8-Port Gigabit PoE+ Switch |
| Ports | 8 x 10/100/1000BASE-T (RJ45) |
| PoE Standard | IEEE 802.3af/at (PoE/PoE+) |
| PoE Power Budget | 240W total |
| Max. PoE Power per Port | 30W |
| Switching Capacity | 16 Gbps |
| MAC Address Table | 8K entries |
| Forwarding Rate | 11.9 Mpps |
| Power Supply | 100-240V AC, 50/60Hz |
| Power Consumption | 260W (max with PoE) |
| Dimensions (W x D x H) | 440 x 230 x 44 mm |
| Weight | 3.4 kg |
| Mounting | 19-inch rack-mountable bracket included |
| Housing | Metal chassis |
| LED Indicators | Power, PoE, Link/Activity (per port) |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Humidity | 5% to 95% (non-condensing) |
| Management | Web-based GUI, SNMP v1/v2c |
| Security | 802.1Q VLAN, QoS, port isolation |
| Cleaning | Use a soft dry cloth; do not use liquid cleaners |
| Safety | Install in a ventilated area; keep away from water |
| Spare Parts | Use only Planet genuine power cord and rack mount kit |
| Standards | IEEE 802.3, 802.3u, 802.3ab, 802.3x |
Frequently Asked Questions - EPL-8000 Planet
How do I set up the Planet EPL-8000 switch?
Connect the power cord, then connect your computers or network devices to the RJ45 ports using Ethernet cables. The switch is plug-and-play for basic use. For advanced features, access the web management interface at the default IP address 192.168.1.1.
How can I perform a factory reset on the switch?
Press and hold the RESET button on the front panel for about 10 seconds until the power LED begins to blink. The switch will restore to factory defaults, including the default IP and password.
What is the total PoE power budget of the EPL-8000?
The switch provides a total PoE power budget of 240W, with a maximum of 30W per port for high-power devices like PTZ cameras and wireless access points.
Does the EPL-8000 support VLANs?
Yes, it supports 802.1Q VLAN tagging, allowing you to segment your network for improved security and traffic management through the web interface.
What is the default IP address and login credentials?
The default management IP is 192.168.1.1. The default username is admin and the password is admin (we recommend you change it after the first login).
Can I mount the switch in a network rack?
Yes, the EPL-8000 comes with a 19-inch rack-mount kit, and it can also be placed on a desktop with the included rubber feet.
How do I clean the switch?
Power off the device and wipe the casing with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays, and avoid cleaning the ports with sharp objects.
What should I do if a PoE device is not receiving power?
Check that the port's PoE allocation is correctly set and that the total PoE consumption does not exceed 240W. You can also verify the LED indicator for that port; it should be solid when PoE is active.
How to update the firmware of the EPL-8000?
Download the firmware file from the official Planet website, then go to the System Maintenance section in the web interface. Use the "Firmware Upgrade" function to upload and install it.
Is the switch suitable for wall mounting?
The package includes a rack-mount kit, but wall mounting is not officially supported. For wall mounting, use a standard 19-inch bracket with appropriate fixings (not supplied).
User questions about EPL-8000 Planet
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network Equipment in PDF format for free! Find your manual EPL-8000 - Planet and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EPL-8000 by Planet.