RC406M - Range hood REX - Free user manual and instructions
Find the device manual for free RC406M REX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Range hood |
| Brand | Rex |
| Model | RC406M |
| Dimensions (W x D x H) | 600 x 500 x 150 mm |
| Weight | 10 kg |
| Power supply | 220-240 V, 50 Hz |
| Power consumption | 200 W |
| Maximum extraction rate | 400 m³/h |
| Number of speeds | 3 |
| Control type | Electronic push buttons |
| Lighting | 2 x 3 W LED |
| Noise level (max) | 65 dB |
| Grease filter | Aluminum |
| Vent outlet diameter | 150 mm |
| Installation type | Wall-mounted |
| Air exhaust type | Ducted / Recirculation with optional carbon filter |
| Maintenance | Clean grease filter monthly |
| Safety features | Overheating protection and thermal cutoff |
Frequently Asked Questions - RC406M REX
How do I properly install the RC406M range hood?
Mount the hood on a sturdy wall at least 65-75 cm above the cooking surface. Ensure the exhaust duct is connected securely and the electrical supply matches the rated voltage. Follow the included installation template for accurate screw placement.
How often should I clean the aluminum grease filter?
The grease filter should be cleaned monthly to maintain optimal extraction efficiency. Use warm soapy water; dry it completely before reinstalling.
Can the RC406M be used in recirculation mode?
Yes, the hood supports recirculation when an optional carbon filter is installed. This is ideal for kitchens without external ducting access.
What should I do if the range hood becomes noisy?
Check for loose parts, a dirty fan blade, or a blocked duct. Ensure the grease filter is clean and properly seated. If noise persists, contact technical support.
How do I replace the LED lights?
Turn off the power, then gently remove the old LED module from its housing. Plug in the new LED module and secure it back in place. Always use a replacement of the same spec.
Why is my hood not extracting efficiently?
Check that the grease filter is clean, the duct is unobstructed, and all speed levels are functioning. For recirculation mode, replace the carbon filter as recommended.
Can I use the hood without a duct when venting externally?
No, for external venting the hood must be connected to a duct. Use a 150 mm rigid or flexible duct, and avoid sharp bends that reduce airflow.
How do I reset the appliance after a power outage?
Simply switch the hood off and unplug it for a few minutes. Plug it back in and select your desired speed. The electronic controls will reset automatically.
Is the RC406M suitable for a gas stove?
Yes, but maintain a minimum distance of 65 cm for gas hobs and 45-50 cm for electric models. Check local building codes for specific clearance requirements.
What does the 3-speed control do?
Speed 1 is quiet and suited for gentle simmering, speed 2 handles normal cooking, and speed 3 provides maximum extraction for heavy frying or grilling.
User questions about RC406M REX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual RC406M - REX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RC406M by REX.
USER MANUAL RC406M REX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : REX
Model : RC406M
Category : Range hood