GI741N - Range hood REX - Free user manual and instructions
Find the device manual for free GI741N REX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wall-mounted range hood |
| Brand | Rex |
| Model | GI741N |
| Installation | Wall-mounted |
| Width | 60 cm |
| Depth | 50 cm |
| Height | Adjustable from 75 to 110 cm |
| Weight | 15 kg |
| Power Supply | 230 V, 50 Hz |
| Motor Power | 150 W |
| Max Airflow | 650 m³/h |
| Number of Speeds | 3 + boost |
| Noise Level | 65 dB(A) at maximum speed |
| Lighting | 2 x 1.5 W LED spotlights |
| Grease Filter | Aluminum mesh, washable |
| Charcoal Filter | Optional, activated carbon |
| Duct Diameter | 150 mm |
| Control Type | Electronic push buttons |
| Modes | Extraction or recirculation |
| Energy Class | B |
| Grease Filter Cleaning | Dishwasher safe up to 40°C |
| Filter Cleaning Frequency | Every 2 months |
| Carbon Filter Replacement | Every 3 to 6 months |
| Safety Features | Thermal protection and overheat cut-off |
| Spare Parts Availability | Available for 10 years |
Frequently Asked Questions - GI741N REX
How do I install the Rex GI741N range hood?
Install the hood at least 65 cm above an electric hob and 75 cm above a gas hob. Use the mounting template to mark the fixing holes, drill and fit the wall plugs, then hang the hood and secure it. For ducted mode, connect a 150 mm exhaust hose to a wall outlet.
What are the dimensions of the Rex GI741N?
The hood is 60 cm wide and 50 cm deep. The height is adjustable from 75 cm to 110 cm, allowing you to match your kitchen layout.
How should I clean the grease filters?
Remove the aluminum grease filters and wash them in warm soapy water or a dishwasher at a maximum of 40°C. Dry them thoroughly before reinstalling. Clean them every 2 months to maintain performance.
When should I replace the activated carbon filter?
If the hood is used in recirculation mode, replace the activated carbon filter every 3 to 6 months depending on cooking frequency. This filter cannot be washed and must be replaced.
How do I switch between extraction and recirculation mode?
In extraction mode, the air is expelled outside via the duct. To convert to recirculation mode, install a charcoal filter on the motor outlet and direct the air through the top grille. Refer to your manual for the exact sequence.
What type of lighting is built in?
The hood is equipped with LED spotlight (2 x 1.5 W), providing bright and efficient lighting over your cooktop. LEDs have a long lifespan and low energy consumption.
Why is my hood vibrating or noisy?
Check that the hood is securely fixed to the wall. Loose filters or ducting can cause rattling. Ensure the anti-return flap is not obstructed. If noise persists, reduce the speed or contact support.
How do I reset the filter saturation indicator?
After cleaning or replacing the filters, press and hold the speed control button for about 3 seconds until the indicator goes off. This resets the counter.
Is the charcoal filter included with the hood?
Usually not. The charcoal filter is an accessory (model Rex RC-01) sold separately. You need it only if you install the hood in recirculation mode.
What is the recommended maintenance schedule?
Clean the grease filters every 2 months, replace the charcoal filter every 3-6 months, and wipe the outer surfaces with a soft damp cloth weekly. Regularly check the ducting for blockages.
User questions about GI741N REX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual GI741N - REX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GI741N by REX.
USER MANUAL GI741N REX
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : REX
Model : GI741N
Category : Range hood