TRASLU43730 - Headphones Tracer - Free user manual and instructions
Find the device manual for free TRASLU43730 Tracer in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of product | Wireless over-ear headphones |
| Brand | Tracer |
| Model | TRASLU43730 |
| Color | Black |
| Connectivity | Bluetooth 5.0 |
| Wireless range | 10 meters (33 feet) |
| Driver diameter | 40 mm |
| Frequency response | 20 Hz - 20 kHz |
| Impedance | 32 Ohms |
| Battery capacity | 300 mAh |
| Battery life | Up to 20 hours |
| Charging time | Approximately 2 hours |
| Charging port | USB-C |
| Weight | 250 grams |
| Dimensions (L x W x H) | 20 x 18 x 8 cm |
| Microphone | Built-in |
| Noise cancellation | Passive |
| Controls | On-ear buttons for volume, playback, and calls |
| Compatibility | Smartphones, tablets, and computers |
| Included accessories | USB-C cable, audio cable, user manual |
| Maintenance | Wipe gently with a soft, dry cloth |
| Storage | Store in a cool, dry place |
Frequently Asked Questions - TRASLU43730 Tracer
How do I pair my Tracer TRASLU43730 headphones with a smartphone?
Activate Bluetooth on your smartphone. Press and hold the power button on the headphones until the LED indicator flashes red and blue. Select 'TRASLU43730' from the list of available devices.
How do I charge the headphones?
Connect the included USB-C cable to the charging port on the headphones and plug the other end into a USB power adapter or computer. The LED indicator will turn red while charging and blue when fully charged.
Can I use the headphones while charging?
Yes, you can use the headphones in wired mode with the included audio cable while they are charging. However, for safety and optimal battery health, we recommend not using them wirelessly during charging.
What should I do if the headphones do not turn on?
First, ensure the battery is charged. Connect the headphones to a power source for at least 10 minutes. If they still do not turn on, try resetting by pressing and holding the power button for 10 seconds, or check if the USB cable is properly connected.
How do I reset the Tracer TRASLU43730 headphones?
To reset the headphones, turn them off, then press and hold the volume up and volume down buttons simultaneously for about 5 seconds. The LED will flash red and blue twice to confirm the reset.
How do I answer or end a call using the headphones?
When a call comes in, press the multifunction button once to answer. Press it again to end the call. To reject an incoming call, press and hold the same button for about 2 seconds.
How do I control the volume and track selection?
Use the volume up and volume down buttons to adjust the volume. To skip to the next track, press and hold the volume up button for about 1 second. Press and hold the volume down button to return to the previous track.
Can I use the headphones with a wired connection?
Yes, the headphones include an audio cable. Insert the cable into the 3.5mm jack on the headphones and connect it to your device. The headphones will automatically switch to wired mode when the cable is plugged in.
How do I clean the headphones?
Use a soft, dry cloth to wipe the ear cushions and headband. For stubborn stains, slightly dampen the cloth with water or mild soap. Avoid getting moisture into the openings and do not use harsh chemicals.
What is the battery life and how long does it take to charge?
The built-in battery offers up to 20 hours of continuous music playback. A full charge takes approximately 2 hours using the supplied USB-C cable and a 5V/1A adapter.
User questions about TRASLU43730 Tracer
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Headphones in PDF format for free! Find your manual TRASLU43730 - Tracer and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TRASLU43730 by Tracer.