AirXpert DWL-7000AP - Access Point D-LINK - Free user manual and instructions
Find the device manual for free AirXpert DWL-7000AP D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | D-Link |
| Model | AirXpert DWL-7000AP |
| Wireless Standards | IEEE 802.11a/b/g |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Maximum Data Rate | Up to 108 Mbps (Turbo mode) |
| Ethernet Ports | 1 x 10/100 Mbps Fast Ethernet (RJ-45) |
| Antennas | 2 external detachable antennas |
| Security Features | WEP 64/128-bit, WPA, MAC address filtering |
| Management | Web browser interface, SNMP v1/v2c |
| Power Supply | External 12V DC adapter |
| Dimensions (WxDxH) | Approximately 190 x 130 x 30 mm |
| Weight | Approximately 450 g |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Keep the unit clean and dust-free; use a dry cloth. |
| Cleaning | Disconnect power before cleaning; do not use liquid cleaners. |
| Repairability | No user-replaceable parts; contact qualified personnel for repair. |
| Mounting | Desktop or wall-mountable |
| Certifications | FCC, CE |
Frequently Asked Questions - AirXpert DWL-7000AP D-LINK
How do I set up the D-Link AirXpert DWL-7000AP as an access point?
To set up as an access point, connect the device to your network via the Ethernet port, power it on, and access the web-based interface using the default IP address (e.g., 192.168.0.50). Configure the wireless settings such as SSID, channel, and security to match your network.
What security modes does the DWL-7000AP support?
It supports WEP (64/128-bit) and WPA encryption. For better security, use WPA with a strong pre-shared key.
Can I mount the DWL-7000AP on a wall?
Yes, the device comes with wall-mounting holes on the underside. Use appropriate screws to attach it securely to a wall or ceiling.
How can I reset the DWL-7000AP to factory defaults?
Locate the reset button on the rear panel. Press and hold it for 5 seconds while the device is powered on. The device will reboot with default settings.
What wireless modes are available?
It can operate as an Access Point, Wireless Bridge, or Repeater, depending on your network needs.
How do I update the firmware?
Download the latest firmware from D-Link's website, then go to the Administration section in the web interface. Use the Firmware Upgrade option to upload the file.
What is the maximum range of the access point?
Indoor range is typically up to 100 meters, while outdoor range can extend to 300 meters under ideal conditions. Actual range depends on obstacles and interference.
Can I use Power over Ethernet (PoE)?
No, the DWL-7000AP does not support PoE. You need to use the included 12V DC adapter.
How do I configure multiple SSIDs?
The DWL-7000AP supports multiple SSIDs via VLAN tagging. In the configuration interface, enable the virtual AP feature to create separate SSIDs with different security settings.
What should I do if the device is not broadcasting its wireless signal?
First, ensure the antennae are connected and the wireless radio is enabled in the settings. Check that the Ethernet connection is active and try resetting the device to factory defaults.
User questions about AirXpert DWL-7000AP D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual AirXpert DWL-7000AP - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AirXpert DWL-7000AP by D-LINK.
USER MANUAL AirXpert DWL-7000AP D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : AirXpert DWL-7000AP
Category : Access Point