DWL-M60AT - Access Point D-LINK - Free user manual and instructions
Find the device manual for free DWL-M60AT D-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | D-Link |
| Model | DWL-M60AT |
| Wireless Standard | IEEE 802.11a/b/g/n |
| Frequency Band | 2.4 GHz and 5 GHz |
| Maximum Data Rate | 300 Mbps per band |
| Ethernet Interface | 1x 10/100/1000 Mbps Gigabit port |
| Power Supply | PoE 802.3af or 12V DC |
| Dimensions | 160 x 120 x 28 mm |
| Weight | 320 g |
| Security | WPA2-PSK, WPA3, 802.1X, MAC filtering |
| Management | Web GUI, SNMP, Telnet |
| Antennas | 2x external RP-SMA (detachable) |
| Mounting | Wall or ceiling mount |
| LED Indicators | Power, LAN, WLAN, WPS |
| Operating Temperature | 0°C to 40°C |
| Humidity | 10% to 90% non-condensing |
| Maintenance | Wipe with a dry soft cloth |
| Repair | Contact D-Link support; no user parts |
| Certifications | FCC, CE, RoHS |
Frequently Asked Questions - DWL-M60AT D-LINK
How do I set up the DWL-M60AT access point?
Connect the access point to your network via Ethernet. Configure it using the web interface at its default IP address. Follow the quick setup wizard to set the SSID and security settings.
What is the default IP address to access the configuration interface?
The default IP address is 192.168.0.50. Connect your computer to the same subnet, open a web browser, and enter this address.
How can I reset the access point to factory defaults?
Press and hold the reset button on the device for about 10 seconds until the power LED blinks. The device will restart with factory default settings.
Does the DWL-M60AT support Power over Ethernet (PoE)?
Yes, the DWL-M60AT supports IEEE 802.3af PoE, allowing power and data transmission over a single Ethernet cable.
How can I secure my wireless network?
Enable WPA2-PSK or WPA3 encryption in the wireless security settings. Also consider disabling SSID broadcast and enabling MAC address filtering for additional access control.
Can I use the access point as a wireless bridge or repeater?
Yes, the device supports multiple operation modes, including access point, wireless bridge, and repeater modes, configurable through the web interface.
What is the maximum number of concurrent users supported?
The access point can support up to 128 concurrent wireless clients, depending on the network environment and data traffic.
How do I update the firmware?
Download the latest firmware from the D-Link support website. In the web interface, go to Tools > Firmware, browse to the file, and click Upload. Do not power off during the update.
What is the range of the wireless signal?
Outdoor range can reach up to 200 meters in open space, while indoor range is approximately 50 meters, depending on obstacles and interference.
How do I mount the access point on a ceiling or wall?
Use the included mounting brackets. Position the bracket, mark the holes, drill and insert anchors, then screw the bracket and attach the access point securely.
User questions about DWL-M60AT D-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual DWL-M60AT - D-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DWL-M60AT by D-LINK.
USER MANUAL DWL-M60AT D-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : D-LINK
Model : DWL-M60AT
Category : Access Point