KAHUDA5CARA - Measurement Kogan - Free user manual and instructions
Find the device manual for free KAHUDA5CARA Kogan in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Laser Distance Measure |
| Model | KAHUDA5CARA |
| Brand | Kogan |
| Dimensions | 115 x 45 x 25 mm |
| Weight | 105 g (without battery) |
| Power Supply | 2 x AAA batteries (not included) |
| Measurement Range | 0.05 - 40 meters |
| Measurement Accuracy | ±2 mm |
| Laser Class | Class 2 (<1 mW, 635 nm) |
| Measurement Units | Metric / Imperial (m, ft/in) |
| Main Functions | Distance, area, volume, continuous measurement, Pythagoras (indirect height) |
| Display | Backlit LCD, 4-digit readout |
| Key Features | One-button operation, auto shut-off after 3 minutes, bubble level |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Maintenance and Cleaning | Wipe with a soft dry cloth; remove batteries if unused for extended periods |
| Safety Warnings | Do not stare directly into laser beam; avoid aiming at eyes |
| Spare Parts and Repairability | Battery compartment cover and batteries are user-replaceable; no other internal serviceable parts |
| General Information | Compact design for portable use; suitable for indoor and outdoor measurements |
Frequently Asked Questions - KAHUDA5CARA Kogan
How do I turn on the laser distance measure?
Press the ON/MEASURE button once. The laser will activate and display a continuous reading. Press the button again to take a measurement.
What batteries does the KAHUDA5CARA use?
It requires 2 AAA batteries (not included). Open the battery compartment on the back, insert them with correct polarity, and close securely.
How accurate is the laser measurement?
The device has an accuracy of ±2 mm under normal conditions, which is typical for this class of laser distance meters.
Can I measure in feet and inches?
Yes, press and hold the UNIT button to cycle between measurement units. Options include meters, feet with decimal, and feet/inches fractional display.
How do I calculate the area of a room?
Press the AREA function button. Then measure the height and width in sequence. The device will automatically multiply the two values and display the area.
Why does the display not show anything after pressing the button?
Check if the batteries are installed correctly or are depleted. Replace with fresh AAA batteries and ensure the battery contacts are clean. If the problem persists, the device may need service.
Is the laser safe for eye exposure?
It is a Class 2 laser with a power output of <1 mW. Avoid directly staring into the beam for long periods. Do not point the laser at people or animals.
Can I use this device outdoors in bright sunlight?
Outdoor use is possible but the measurement range may be reduced in very bright sunlight. For best results, use the included target plate or measure in shaded areas.
How do I switch between distance, area, and volume modes?
Press the FUNCTION button repeatedly to cycle through modes: distance, area, volume, and Pythagoras. The current mode is shown on the display.
What does the continuous measurement function do?
In continuous mode, the laser stays on and the display updates in real-time as you move the device. This helps in measuring distances to a fixed point or aligning objects.
User questions about KAHUDA5CARA Kogan
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measurement in PDF format for free! Find your manual KAHUDA5CARA - Kogan and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. KAHUDA5CARA by Kogan.