Ti310d2 - Subwoofer PHOENIX GOLD - Free user manual and instructions
Find the device manual for free Ti310d2 PHOENIX GOLD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Phoenix Gold |
| Model | Ti310d2 |
| Category | Car Audio Subwoofer |
| Size | 10 inches |
| Impedance | Dual 2 ohm voice coils |
| RMS Power Handling | 400 Watts |
| Peak Power Handling | 800 Watts |
| Frequency Response | 25 Hz - 500 Hz |
| Sensitivity | 85 dB (2.83V/1m) |
| Cone Material | Reinforced polypropylene |
| Surround Material | Rubber |
| Basket Material | Cast aluminum |
| Magnet Type | High-flux ferrite |
| Mounting Depth | 5.5 inches (140 mm) |
| Mounting Cutout | 9.0 inches (229 mm) |
| Overall Diameter | 10.2 inches (259 mm) |
| Net Weight | 5.4 kg (12 lbs) |
| Recommended Sealed Box Volume | 0.9 - 1.25 cu ft |
| Recommended Ported Box Volume | 1.5 - 2.0 cu ft |
| Terminal Type | Spring-loaded push terminals |
| Installation | Requires amplifier and enclosure |
| Maintenance | Wipe with a dry cloth; avoid moisture |
| Safety | Turn off amplifier before wiring |
| Spare Parts & Repairability | Voice coil and surround replaceable; service through dealer |
Frequently Asked Questions - Ti310d2 PHOENIX GOLD
What is the impedance of the Phoenix Gold Ti310d2?
The Ti310d2 features dual 2-ohm voice coils, giving you flexibility to wire it to a 1-ohm or 4-ohm load depending on your amplifier's capability.
What size enclosure is recommended?
For a sealed box, use 0.9 to 1.25 cubic feet. For a ported box, use 1.5 to 2.0 cubic feet tuned to around 30-35 Hz for optimal low-frequency output.
What amplifier power should I use?
The Ti310d2 handles 400 watts RMS and peaks at 800 watts. Choose an amplifier that delivers between 300-500 watts RMS at the final impedance you wire the subwoofer to.
How do I wire the dual voice coils?
You can wire the two 2-ohm coils in parallel to create a 1-ohm load, or in series to create a 4-ohm load. Select the configuration that matches your amplifier's stable impedance rating.
Do I need to break in the subwoofer?
Yes, a 30-40 hour break-in at moderate volume is recommended. This allows the suspension to loosen and the subwoofer to reach its full excursion and low-frequency performance.
What is the frequency response range?
The Ti310d2 reproduces frequencies from 25 Hz to 500 Hz, making it ideal for deep bass in both sealed and ported enclosures.
How do I clean and maintain the subwoofer?
Wipe the cone and surround with a dry microfiber cloth. Avoid using any liquids or cleaners, as they can damage the materials. Keep the subwoofer away from moisture and extreme heat.
Can I use this subwoofer in a home theater system?
Yes, but you'll need a suitable subwoofer amplifier and enclosure. The 10-inch design works well for home audio, providing tight and powerful bass.
What mounting depth is required?
The mounting depth is 5.5 inches (140 mm). Ensure your enclosure has at least this depth, plus a little extra for clearance to avoid the magnet hitting the back panel.
Why is there no sound from my subwoofer?
Check the amplifier's status, the wiring connections at both the amp and subwoofer, and the head unit's subwoofer output settings. Also verify that the impedance load is safe for your amplifier.
User questions about Ti310d2 PHOENIX GOLD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Ti310d2 - PHOENIX GOLD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Ti310d2 by PHOENIX GOLD.
USER MANUAL Ti310d2 PHOENIX GOLD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHOENIX GOLD
Model : Ti310d2
Category : Subwoofer