Z12AB - Subwoofer PHOENIX GOLD - Free user manual and instructions
Find the device manual for free Z12AB PHOENIX GOLD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Car Audio Subwoofer |
| Brand | Phoenix Gold |
| Model | Z12AB |
| Category | Subwoofer |
| Woofer Size | 12 inches (30.5 cm) |
| Impedance | 4 ohms |
| Power Handling (RMS) | 400 watts |
| Peak Power | 800 watts |
| Sensitivity | 89 dB |
| Frequency Response | 25 Hz - 500 Hz |
| Magnet Weight | 180 oz (5.1 kg) |
| Voice Coil Size | 2.5 inches (64 mm) |
| Mounting Depth | 6.7 inches (170 mm) |
| Mounting Diameter | 11.1 inches (282 mm) |
| Cutout Diameter | 10.9 inches (277 mm) |
| Recommended Enclosure Volume | 1.0 - 1.5 cubic feet (sealed) |
| Recommended Amplifier Power | 300 - 500 watts RMS |
| Connection Type | Push-terminal binding posts |
| Cone Material | Injection-molded polypropylene |
| Surround Material | High-roll foam |
| Special Features | High-temperature voice coil, aluminum basket |
| Maintenance | Gently clean with a soft dry cloth |
Frequently Asked Questions - Z12AB PHOENIX GOLD
What is the recommended enclosure size for the Phoenix Gold Z12AB?
For a sealed enclosure, a volume of 1.0 to 1.5 cubic feet is recommended. For a ported enclosure, use 1.5 to 2.0 cubic feet tuned to 35 Hz.
What amplifier power should I use with the Z12AB?
The Z12AB can handle 400 watts RMS and 800 watts peak. An amplifier delivering 300 to 500 watts RMS at 4 ohms is ideal for clean power and reliability.
Is the Z12AB a single voice coil or dual voice coil subwoofer?
The Z12AB features a single 4-ohm voice coil, making it simple to wire to a monoblock amplifier or a bridged stereo channel.
How long does it take to break in the Z12AB subwoofer?
Break-in typically takes 10 to 20 hours of moderate listening. Start at lower volume and gradually increase to full power to allow the surround and spider to loosen naturally.
What is the frequency response of the Z12AB?
The subwoofer reproduces frequencies from 25 Hz to 500 Hz, making it suitable for deep bass reproduction in both music and home theater applications.
Can the Z12AB be used in a sealed enclosure?
Yes, the Z12AB is excellent in a sealed enclosure. A sealed box from 1.0 to 1.5 cubic feet provides tight, accurate bass with good transient response.
What are the mounting dimensions of the Z12AB?
The overall mounting depth is 6.7 inches (170 mm), and the mounting diameter is 11.1 inches (282 mm). The required cutout diameter is 10.9 inches (277 mm).
How should I wire a single 4-ohm voice coil subwoofer to my amplifier?
Connect the positive terminal of the subwoofer to the amplifier's positive output, and the negative terminal to the amplifier's negative output. For a mono amplifier, use one channel; for a stereo amplifier, bridge two channels.
How do I clean and maintain the Z12AB?
Use a soft, dry cloth to gently wipe the cone and surround. Do not use water or cleaning agents, as they may damage the foam surround or the cone material.
Does the Z12AB come with a warranty?
Phoenix Gold typically offers a 1-year warranty against manufacturing defects. Keep your purchase receipt to validate the warranty.
User questions about Z12AB PHOENIX GOLD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Z12AB - PHOENIX GOLD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Z12AB by PHOENIX GOLD.
USER MANUAL Z12AB PHOENIX GOLD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHOENIX GOLD
Model : Z12AB
Category : Subwoofer