MX12D4 - Subwoofer PHOENIX GOLD - Free user manual and instructions
Find the device manual for free MX12D4 PHOENIX GOLD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Phoenix Gold |
| Model | MX12D4 |
| Category | Car Audio Subwoofer |
| Size | 12 inches |
| Impedance | Dual 4 ohms |
| RMS Power Handling | 400 Watts |
| Peak Power Handling | 800 Watts |
| Sensitivity | 86 dB (1W/1m) |
| Frequency Response | 20 Hz - 200 Hz |
| Mounting Depth | 6.5 inches |
| Mounting Hole Diameter | 11.2 inches |
| Recommended Enclosure | Sealed: 1.25 cu. ft., Ported: 1.75 cu. ft. |
| Voice Coil | Dual 4-ohm voice coils |
| Cone Material | Polypropylene with rubber surround |
| Weight | 18 lbs |
| Power Connection | Push terminals |
| Cleaning Instructions | Wipe with dry cloth, avoid liquids |
| Safety Notices | Do not expose to moisture; ensure proper ventilation |
| Spare Parts Availability | Contact Phoenix Gold customer service for replacement parts |
| Reparability | Serviceable by authorized technicians only |
| General Information | High-performance subwoofer for car audio systems |
Frequently Asked Questions - MX12D4 PHOENIX GOLD
What is the impedance of the Phoenix Gold MX12D4 subwoofer?
The MX12D4 has dual 4-ohm voice coils, so it can be wired to 2 ohms (parallel) or 8 ohms (series).
What is the RMS power handling of this subwoofer?
The RMS power handling is 400 watts, with a peak handling of 800 watts.
What type of enclosure is recommended for the MX12D4?
Phoenix Gold recommends a sealed enclosure of 1.25 cubic feet or a ported enclosure of 1.75 cubic feet.
What is the mounting depth of the MX12D4?
The mounting depth is 6.5 inches, and the mounting hole diameter is 11.2 inches.
How do I break in the Phoenix Gold MX12D4 subwoofer?
Play music at moderate volume for 10-20 hours to break in the suspension.
Can I use this subwoofer in a home audio system?
Yes, but you will need a suitable amplifier designed for 4-ohm or 2-ohm loads and proper enclosure.
What is the sensitivity of the MX12D4?
The sensitivity is 86 dB (1W/1m), which is typical for a 12-inch subwoofer.
Is the subwoofer suitable for use with a factory car stereo?
You will need an aftermarket amplifier because the subwoofer requires more power than a factory stereo can provide.
How do I clean the MX12D4 subwoofer?
Wipe the cone and surround with a dry cloth; do not use water or cleaning agents.
What is the frequency response of this subwoofer?
The frequency response is 20 Hz to 200 Hz, covering deep bass to upper bass frequencies.
User questions about MX12D4 PHOENIX GOLD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual MX12D4 - PHOENIX GOLD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MX12D4 by PHOENIX GOLD.
USER MANUAL MX12D4 PHOENIX GOLD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHOENIX GOLD
Model : MX12D4
Category : Subwoofer