TI312D4X - Subwoofer PHOENIX GOLD - Free user manual and instructions
Find the device manual for free TI312D4X PHOENIX GOLD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Phoenix Gold |
| Model | TI312D4X |
| Product Type | Subwoofer |
| Size | 12 inches |
| Voice Coil Configuration | Dual 4-ohm |
| Impedance | 2 ohms or 8 ohms (depending on wiring) |
| Power Handling (RMS) | 500 Watts |
| Power Handling (Peak) | 1000 Watts |
| Sensitivity | 88 dB |
| Frequency Response | 20 Hz – 500 Hz |
| Mounting Depth | 6.5 inches |
| Mounting Cutout | 11.2 inches |
| Enclosure Type Recommended | Sealed or Ported |
| Sealed Box Volume | 1.0 cubic feet |
| Ported Box Volume | 1.5 cubic feet |
| Impedance (per coil) | 4 ohms |
| Woofer Cone Material | Paper with reinforced coating |
| Surround Material | Rubber |
| Voice Coil Wire | Copper |
| Magnet Type | Ferrite |
| Terminal Type | Spring-loaded push terminals |
| Woofer Displacement | 0.1 cubic feet |
| Dimensions (Diameter x Depth) | 12.5 x 7.5 inches |
| Weight | 15 lbs |
Frequently Asked Questions - TI312D4X PHOENIX GOLD
How do I wire the TI312D4X subwoofer for a 2-ohm load?
Connect the positive terminal of the first voice coil to the positive of the amplifier, and the negative of the first coil to the positive of the second coil. Then connect the negative of the second coil to the negative of the amplifier. This is series-parallel wiring resulting in a 2-ohm load.
What is the recommended enclosure volume for the TI312D4X?
For a sealed enclosure, 1.0 cubic feet is recommended. For a ported enclosure, 1.5 cubic feet with a 4-inch port (14 inches long) tuned to 35 Hz.
Can I use this subwoofer in a free-air installation?
No, the TI312D4X is designed for enclosed applications only. Using it free-air may cause damage.
What is the RMS power handling of the TI312D4X?
The RMS power handling is 500 Watts. It can handle up to 1000 Watts peak momentarily.
Does the subwoofer come with a grille?
No, the TI312D4X is typically sold without a grille. You may purchase an aftermarket grille if needed.
What is the impedance of each voice coil?
Each voice coil has an impedance of 4 ohms. This allows wiring for 2 ohms (parallel) or 8 ohms (series).
How do I break-in the TI312D4X subwoofer?
Play music at moderate volume (50% of rated power) for 10-20 hours. Avoid heavy bass at high volume initially to allow the suspension to loosen.
What is the mounting depth of this subwoofer?
The mounting depth is 6.5 inches. Ensure your enclosure has at least 7 inches of internal depth for proper clearance.
Can I mount the subwoofer in a vertical position?
Yes, the subwoofer can be mounted in any orientation as long as the enclosure is stable and the cone is not obstructed.
What type of adhesive should I use for the surround if it gets damaged?
Use a rubber-compatible adhesive such as black silicone or specific subwoofer surround glue. Apply sparingly and let cure for 24 hours.
User questions about TI312D4X PHOENIX GOLD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual TI312D4X - PHOENIX GOLD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TI312D4X by PHOENIX GOLD.
USER MANUAL TI312D4X PHOENIX GOLD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHOENIX GOLD
Model : TI312D4X
Category : Subwoofer