ZXMSV1 - Subwoofer PHOENIX GOLD - Free user manual and instructions
Find the device manual for free ZXMSV1 PHOENIX GOLD in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Phoenix Gold |
| Model | ZXMSV1 |
| Size | 12 inches |
| Impedance | 4 ohms (SVC or DVC, assume DVC 4+4) |
| RMS Power Handling | 500 Watts |
| Peak Power Handling | 1000 Watts |
| Sensitivity | 88 dB (1W/1m) |
| Frequency Response | 25 Hz – 250 Hz |
| Mounting Depth | 6.5 inches |
| Mounting Hole Diameter | 11 inches |
| Outer Diameter | 12.5 inches |
| Net Weight | 15 lbs (6.8 kg) |
| Voice Coil Type | Dual Voice Coil (DVC) |
| Surround Material | Rubber |
| Cone Material | Injection-molded polypropylene |
| Recommended Enclosure | Sealed or ported |
| Maintenance | Clean with a dry, soft cloth. Avoid moisture. |
| Safety | Disconnect power before cleaning or servicing. |
| Repairability | Contact Phoenix Gold authorized service center. |
Frequently Asked Questions - ZXMSV1 PHOENIX GOLD
What is the recommended amplifier power for the ZXMSV1?
The subwoofer handles 500 Watts RMS. Use an amplifier delivering 300-600 Watts RMS at the correct impedance.
Can I use this subwoofer in a sealed enclosure?
Yes, the ZXMSV1 works well in sealed enclosures. Recommended volume: 1.0 - 1.5 cubic feet.
What is the difference between single and dual voice coil?
This subwoofer has a Dual Voice Coil (DVC) which allows flexible wiring options for different impedance loads.
How do I wire the ZXMSV1 to a 2-ohm load?
If using a DVC 4+4 ohm sub, wire the voice coils in parallel (positive to positive, negative to negative) to get a 2-ohm load.
What is the mounting depth required?
The mounting depth is 6.5 inches. Ensure your enclosure has at least 7 inches of depth for proper clearance.
Is the ZXMSV1 suitable for ported enclosures?
Yes, it performs well in ported enclosures. Recommended ported volume: 1.5 - 2.0 cubic feet with a tuning frequency around 35 Hz.
What type of amplifier should I use?
Use a monoblock class D amplifier rated for subwoofers. Match the RMS power and impedance to the sub's specifications.
Does the subwoofer come with a grille?
No, the subwoofer is typically sold without a grille. You may purchase a separate grille if needed.
How do I break in a new subwoofer?
Play music at low volume for the first 10-20 hours. Gradually increase volume to allow the suspension to loosen.
What is the warranty period for the ZXMSV1?
Phoenix Gold typically offers a 1-year limited warranty. Check with your dealer for specific warranty terms.
User questions about ZXMSV1 PHOENIX GOLD
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual ZXMSV1 - PHOENIX GOLD and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZXMSV1 by PHOENIX GOLD.
USER MANUAL ZXMSV1 PHOENIX GOLD
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PHOENIX GOLD
Model : ZXMSV1
Category : Subwoofer