MI-X290 Flicker - Loudspeaker AIWA - Free user manual and instructions
Find the device manual for free MI-X290 Flicker AIWA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Portable Wireless Speaker |
| Brand | AIWA |
| Model | MI-X290 Flicker |
| Category | Loudspeaker |
| Connectivity | Bluetooth 5.0 with A2DP, AVRCP |
| Output Power | 10W RMS |
| Frequency Response | 100 Hz - 20 kHz |
| Signal-to-Noise Ratio | ≥ 80 dB |
| Battery Type | Rechargeable Lithium-Ion |
| Battery Capacity | 1800 mAh |
| Playback Time | Up to 6 hours (depending on volume and lighting) |
| Charging Time | Approximately 3 hours |
| Charging Port | USB-C |
| Speaker Driver | 52 mm full-range driver |
| LED Lighting | Multi-color RGB glow effects with multiple modes |
| Additional Features | TWS pairing, hands-free calls, AUX-in, microSD slot |
| Controls | Button control for power, volume, play/pause, lights, calls |
| Water Resistance | IPX5 splash-proof |
| Dimensions | Approx. 180 × 68 × 68 mm |
| Weight | Approx. 400 g |
| Material | Plastic body with acoustic fabric mesh |
| Care and Cleaning | Wipe with a soft dry cloth; avoid direct water exposure |
| Safety | Keep away from heat sources; do not disassemble; use certified charger |
| Spare Parts and Repairability | Battery replaceable by qualified service center |
| General Information | User manual available in PDF format |
Frequently Asked Questions - MI-X290 Flicker AIWA
How do I pair the AIWA MI-X290 Flicker with my smartphone?
Turn on the speaker by pressing and holding the power button for 3 seconds. The speaker will enter Bluetooth mode automatically if no device is connected. On your phone, enable Bluetooth and select AIWA MI-X290 from the available list. If required, enter the PIN 0000. Once paired, you will hear a confirmation tone.
How long does the battery last and how long does it take to charge?
The built-in 1800 mAh battery provides up to 6 hours of playback at moderate volume with lighting on. Charging takes approximately 3 hours via the USB-C port. Use a 5V/1A adapter for optimal charging.
Can I connect two MI-X290 speakers for true wireless stereo?
Yes. The speaker supports TWS (True Wireless Stereo). Play music on the primary speaker, then press the TWS button on both speakers to pair them wirelessly. One speaker acts as the left channel and the other as the right channel.
How do I change or turn off the RGB light effects?
Press the lighting button on the control panel to cycle through the different LED modes, including pulse, beath, and solid colors. Press and hold the same button to turn the lights off and save battery.
Is the speaker waterproof?
The speaker has an IPX5 splash-proof rating. It can withstand light splashes from any direction but should not be submerged in water or exposed to heavy rain for long periods.
Can I use the speaker for hands-free calls?
Yes, the built-in microphone allows you to answer calls hands-free. When a call comes in, press the play/pause button to answer, and press again to end the call. The audio will route through the speaker.
What is the Bluetooth range and version?
The speaker uses Bluetooth 5.0 with a working range of up to 10 meters (about 30 feet) in open space. The connection is stable and supports basic A2DP streaming.
How do I reset the speaker if it malfunctions?
To reset, turn off the speaker, then press and hold both the volume + and power button for about 5 seconds until the LED indicator flashes. Release the buttons and restart the speaker. This restores factory defaults and clears pairing info.
How do I clean and maintain my speaker?
Use a soft, dry lint-free cloth to wipe the exterior. Do not use water, solvents, or abrasive cleaners. Clean the fabric mesh gently with a soft brush to prevent dust buildup. Always store the speaker in a dry place when not in use.
What devices can I connect via the AUX input?
The speaker's 3.5mm AUX-in port allows you to connect any device with a headphone jack, such as smartphones, tablets, laptops, or mp3 players. Use a 3.5mm to 3.5mm audio cable (not included) and press the mode button to switch to AUX mode.
User questions about MI-X290 Flicker AIWA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual MI-X290 Flicker - AIWA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MI-X290 Flicker by AIWA.
USER MANUAL MI-X290 Flicker AIWA
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : AIWA
Model : MI-X290 Flicker
Category : Loudspeaker