SB-X350P - Loudspeaker AIWA - Free user manual and instructions

Product Type	Portable Wireless Stereo Speaker
Brand	Aiwa
Model	SB-X350P
Dimensions	372 x 192.3 x 100 mm (14.6 x 7.6 x 3.9 in)
Weight	3.7 kg (8.16 lbs)
Output Power	230W
Frequency Response	60 Hz - 20 kHz
Signal-to-Noise Ratio	≥80 dB
Battery Type	Rechargeable Li-ion, 7.2V, 4000mAh
Battery Life	2.6 - 10 hours (depending on volume and content)
Charging Time	5.6 hours
Charging Port	USB Type-C
Bluetooth Version	5.6
Wireless Range	10 meters (33 feet)
Bluetooth Profiles	A2DP, AVRCP, GAVDP, AVDTP, SRP, AVCTP
TWS Function	Yes - True Wireless Stereo pairing of two speakers
Inputs	AUX 3.5mm, TF card (microSD)
Sound Modes	Indoor / Outdoor (default Indoor)
LED Light Modes	Music pulse, half circle rotation, full cyclic rotation, push rhythm, music pulse (middle), off
Package Contents	Speaker, Type-C charging cable, AUX cable, user manual
Safety Precautions	Keep away from water, extreme heat, strong magnetic fields; do not use at high volume for extended periods; do not disassemble
Cleaning	Use a soft dry cloth; no chemicals or abrasive cleaners
Auto Power Off	After 10 minutes in pairing mode if no device connected
Reset Function	Insert a pin into the reset hole for 2 seconds

Frequently Asked Questions - SB-X350P AIWA

How do I power on the SB-X350P speaker?

Press the @ button until you hear a rising tone and the Bluetooth LED indicator lights up.

How do I pair the speaker with my phone via Bluetooth?

Ensure the speaker is within 10 meters. Press the @ button to enter pairing mode (LED flashes). On your phone, select "AIWA SB-X350P" from the Bluetooth list. Once paired, the LED turns solid blue.

What is the battery life and charging time?

Battery life ranges from 2.6 to 10 hours depending on volume. Full charging takes approximately 5.6 hours via the included Type-C cable.

Can I connect two speakers for stereo sound?

Yes, use the TWS (True Wireless Stereo) function. Double-click the @ button on one speaker to make it the Master. The second speaker will automatically pair as Slave.

How do I change the sound mode?

Double-click the p (Mode) button to toggle between Indoor (solid blue LED) and Outdoor (flashing blue LED). The default is Indoor.

What is the output power of the speaker?

The speaker has an output power of 230W.

How do I play music from a TF card?

Insert a microSD (TF) card into the dedicated slot. The speaker will automatically switch to TF card mode and play MP3 files stored on the card.

How do I adjust the volume?

Rotate the spring knob clockwise to increase volume, counterclockwise to decrease.

What do the different LED light modes do?

Press the Light button to cycle through modes: Music pulse (bottom to top), half circle rotation, full cyclic rotation, push rhythm, music pulse (middle), and off.

How do I reset the speaker if it malfunctions?

Disconnect the charging cable, insert a small pin (5mm) into the reset hole and hold for 2 seconds. The LED will turn off, resetting the speaker.

USER MANUAL SB-X350P AIWA

[IMAGE]Portable Wireless Stereo SpeakerUSER MANUALSB-X350P	Package Includes• 1 x Speaker• 1 x Type-C charging Cable• 1 x AUX Cable (Φ3.5mm)• 1 x User ManualOverivew of Speaker	[IMAGE]Charging1.Before first time use, fully charge the built-in battery.2.Connect the Type-C Cable (included) between the charging port on the speaker, and a USB port on a computer or USB AC Adapter.	Note: When the battery charge <5%, the speaker will power off automatically.Power OnPress button until hear a rising tone and the Bluetooth LED Indicator light on.Power OffPress button until hear a descending tone and the Bluetooth LED Indicator light off.Bluetooth connectionMake sure that the speaker is within 10 meters from your mobile device.1. Press button until hear a rising tone and the Bluetooth LED Indicator fast blinking blue.2. Go to the Bluetooth settings on your mobile device, search and select "AIWA SB-X350P" from the list.3. Once paired, the LED indicator turns blue.Note:• When power on, the speaker automatically reconnects to the last mobile device it was connected to. (The speaker can memorize maximum of 8 paired devices ).• The speaker will automatically shut down after 10 minutes in pairing mode if no devices are paired for power saving.	Music ControlPlayPause ......Click>Volume UP ......Rotate the knobClockwise○Volume Down...Rotate the knobCounterclockwise○Next track ......clickPrevious track......click KIDSwitch Bluetooth mode/Aux-in mode......Click MBluetooth DisconnectionPress *M * button until the Bluetooth LED Indicator fast blinking blue to disconnect the current connected device, and go into new Bluetooth-paring mode.
		Battery Status	Battery LED Indicator
		Low battery (<20%)	Blinking Red (Sound Prompts 3 times at 20%, 10%, and power off)
		30% charged 1st white	light flashes
		30%-70% charged	2nd white light flashes
		70%-99% charged	3rd white light flashes
		3 solid white lights	Fully charged

TWS (True Wireless Stereo) FunctionThe TWS technology enables you to use two speakers pairing via Bluetooth to create a wireless dual-channel system to deliver true stereo sound effect.TWS connection operation1. Place the two speakers near each other (the distance should not be over 10 meters).2. Power on the two speakers, double click the ⏻ button on one speaker as MASTER speaker (playback left channel ), the LED indicator fast blinking Blue and greeth then the two speaker will pair to each other automatically ( The other speaker will be as SLAVE speaker and playback right channel )3. Once paired, Master and slave speaker LED indicator turn solid blueDisconnect the TWS connectionPress* M * mode button on one of the speaker until LED Indicator fast blinking Blue to disconnect the TWS connection.

Listening music from external audio source1.Power on the speaker.2. Using the AUX Cable (q3.5mm), connect your external device to AUX-in port on speaker.3.It will automatically turn to AUX-in mode, the LED Indicator turns solid green.Note: Under AUX-IN mode, skip songs are not workable.LED lights ModeClick * -g* button to change the LED Lights modes.1: Musical Pulse (Pulse from bottom to top)2: Half-circle rotation (rotate with the rhythm of the music)3: Full-Cyclic rotation (rotation speed is automatically adjusted with the size of the music)4: Flash rhythm (brightness flashes with the beats of the music)5: Musical Pulse (from the middle to the upper and lower pulse)6: Turn off the lightsSound modeDouble click * > * mode button to change the sound mode. The LED indicator slowly flash blue in outdoor mode, and the LED indicator keep solid blue in indoor mode.Remark: This speaker's default mode is indoor.under the USB disk and TF card mod, LED is green.Mode Change Button ▷ : Outdoor/Indoor

TF card reader (micro SD card)Just simple insert your TF card into the port, the speaker can automatically turn to TF card reader mode, and play the MP3 music store in the card.Reset the speaker: if the function buttons without working, disconnect the charging cable, place a small pin (<3mm) into the reset key and hold it for 2 seconds until the LED light off.SpecificationsBluetooth 5.0Support: A2DPV1.2; AVRCPV1.4; GAVDPV1.2; AVDTPV1.2; SPPV1.2; AVCTPV1.2Wireless work distance: 10 metersOutput Power: 2*30WDriver Unit: Diameter 102 mm outside mangnet, 40hm, 35W*2Diameter 31 mm inside mangnet , 80hm, 15W*2Frequency response: 60Hz-20KHzSignal-to-noise ratio: ≥80DBBattery type: Lithium-ion, 7.2V/4000MAH(*2000mah)DC input voltage/current: TYPE-C USB 5V/0.5A-2APlaytime: 2.5-10 hours (varies by volume level and content)Battery charge time: 5-6 hoursDimensions: 372*193.3*166mmWeight: 3.7 kgs

CautionKeep the speaker and its accessories away from the reach of kids as they might cause a choking hazard.Keep the speaker away from fire, water, liquids, extreme heat, and strong magnetic fields.Do NOT use this speaker at high volume for extended periods, as this may cause permanent hearing damage or loss.Do NOT drop or knock the speaker on hard surfaces.Do NOT use chemicals or detergents to clean the speaker.Do NOT scrape the surface with sharp objects.Do NOT make unauthorized alterations to this product.TroubleshootingCannot Power OnCharge the speaker and make sure it has enough batteryCannot connect with the devicePlease check the following:The Bluetooth device supports A2DP profileThe Speaker is within 10m from the device.The Speaker is in pairing mode, the LED indicator blinking blue.

No SoundMake sure the music volume is at audible level on both your device and speaker.Make sure your device is successfully paired with the speaker, the LED indicator turn solid blue.Poor sound qualityMove the device closer to this Speaker or remove any obstacle between them.