RCM-070-EU-WIT - Home Automation Rako - Free user manual and instructions
Find the device manual for free RCM-070-EU-WIT Rako in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Dimmer Module |
| Brand | Rako |
| Model | RCM-070-EU-WIT |
| Category | Home Automation |
| Operating Voltage | 230 V AC, 50 Hz |
| Maximum Load (Incandescent) | 700 W |
| Maximum Load (LED) | 150 W |
| Dimming Method | Leading/Trailing Edge |
| Communication Protocol | Rako Wave (868 MHz proprietary wireless) |
| Number of Channels | 1 |
| Control Options | Rotary dimmer, push buttons, Rako remote controls |
| Dimensions | 45 x 45 x 25 mm (approx.) |
| Mounting | In-wall or ceiling, suitable for single-gang boxes |
| Ambient Temperature | 0°C to 35°C |
| Degree of Protection | IP20 (indoor use only) |
| Certifications | CE |
| Maintenance | Wipe with a clean dry cloth |
| Cleaning | Do not use liquids or solvents |
| Safety | Isolate mains supply before installation |
| Repairability | No user-serviceable parts; replacement required |
| Installation | Must be installed by a qualified electrician |
Frequently Asked Questions - RCM-070-EU-WIT Rako
What is the maximum load for LED bulbs?
The RCM-070-EU-WIT supports up to 150 W for LED lighting to ensure reliable dimming and prevent flicker.
Can this module be used with trailing edge dimmers?
Yes, the module is compatible with both leading edge and trailing edge dimmable bulbs, making it versatile with most LED and incandescent loads.
What type of wireless protocol does it use?
It uses Rako Wave, a proprietary 868 MHz wireless protocol that provides reliable communication with Rako transmitters and remote controls.
Can I control it with a smartphone?
Yes, by adding a Rako Wifi Bridge, you can control the module via the Rako app on iOS or Android devices for local and remote access.
How do I reset the module?
To reset, press and hold the program button for about 10 seconds until the LED indicator blinks rapidly. Release the button to complete the reset.
Is it compatible with two-way switching?
Yes, the module can be used in two-way switching circuits when paired with compatible Rako wall switches or wireless transmitters.
What is the minimum load?
The minimum load is typically 1 W for LED and 5 W for incandescent bulbs, ensuring stable dimming performance at low power levels.
Can I use it with a ceiling fan?
No, this module is designed strictly for lighting loads. Using it with a fan motor could damage the module and void the warranty.
Does it require a neutral wire?
Yes, the RCM-070-EU-WIT requires a neutral wire for proper operation and to power the wireless receiver circuitry.
How do I pair it with a Rako transmitter?
Place the module in programming mode by pressing its program button briefly, then send the desired command from the transmitter. The module will confirm pairing with a blinking LED.
User questions about RCM-070-EU-WIT Rako
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Automation in PDF format for free! Find your manual RCM-070-EU-WIT - Rako and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RCM-070-EU-WIT by Rako.
USER MANUAL RCM-070-EU-WIT Rako
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rako
Model : RCM-070-EU-WIT
Category : Home Automation