RSRDMX - Home Automation Rako - Free user manual and instructions
Find the device manual for free RSRDMX Rako in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product type | DMX interface module for wireless lighting control |
| Brand | Rako |
| Model | RSRDMX |
| Category | Home Automation |
| Dimensions | 50 × 50 × 20 mm (approx.) |
| Weight | 100 g (approx.) |
| Power supply | 12-24 V DC |
| Protocol | DMX512 |
| Wireless frequency | 433.92 MHz (typical Rako) |
| Number of DMX channels | 512 (typical DMX interface) |
| Mounting | Wall or ceiling box |
| Compatibility | Rako wireless control systems |
| Main functions | Converts wireless commands to DMX output; supports multiple scenes and zones |
| Maintenance | Wipe with dry cloth; do not use liquids |
| Safety | Install in accordance with local electrical codes; ensure isolation from mains |
| Spare parts | Non-user-serviceable; contact Rako support |
| Repairability | Professional repair only |
| Operating temperature | 0°C to 40°C (approx.) |
| Enclosure material | Flame-retardant plastic |
| Certification | CE, RoHS |
Frequently Asked Questions - RSRDMX Rako
How do I install the RSRDMX?
Ensure the power is off before installation. Mount the device in a suitable enclosure, connect the DMX output to your fixtures, and wire the power supply (12-24 V DC). Then configure it with your Rako wireless system.
What is the power supply requirement?
The RSRDMX requires a 12-24 V DC power supply. Always use a regulated power source and observe the correct polarity.
Can I control DMX fixtures with Rako keypads?
Yes, the RSRDMX acts as a bridge between Rako wireless keypads and DMX fixtures. You can control DMX512 devices using standard Rako scenes and zones.
How many DMX channels does it support?
It supports up to 512 DMX channels, the full DMX512 universe. This allows control of many fixtures or complex lighting effects.
How do I set the DMX address?
The DMX address is set via the Rako configuration software. Connect the module to your Rako network and assign the desired start address using the software or a compatible programmer.
Is it compatible with other Rako modules?
Yes, it is designed to work with the full range of Rako wireless control systems, including keypads, scene controllers, and sensors, as long as they use the same Rako protocol.
How do I clean and maintain the device?
Clean the exterior with a soft dry cloth. Do not use water, solvents, or abrasive cleaners. Keep the device free from dust and ensure ventilation around the module.
What does the LED indicator mean?
The LED indicator typically shows power status (solid when powered) and signal activity (blinking when receiving commands). Refer to the manual for exact behavior.
Can I use it with 230V lighting?
The RSRDMX outputs DMX512 control data, not mains voltage. You need appropriate DMX-controlled drivers or fixtures to handle 230V lighting safely.
Where can I find the user manual?
The user manual is available for free download on notice-facile.com in PDF format. You can also contact Rako support for additional documentation.
User questions about RSRDMX Rako
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Automation in PDF format for free! Find your manual RSRDMX - Rako and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RSRDMX by Rako.
USER MANUAL RSRDMX Rako
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Rako
Model : RSRDMX
Category : Home Automation