JUVLP200 - Uncategorized Jandy - Free user manual and instructions
Find the device manual for free JUVLP200 Jandy in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Pool Heater (Gas) |
| Brand | Jandy |
| Model | JUVLP200 |
| Fuel Type | Liquid Propane (LP) |
| Input Heat Rating | 200,000 BTU/hr |
| Thermal Efficiency | Up to 82% |
| Ignition | Electronic direct spark ignition |
| Heat Exchanger | Stainless steel / titanium alloy |
| Control System | Digital thermostat with LED display |
| Venting | Forced draft power vent |
| Water Connections | 2-inch PVC unions |
| Gas Connection | 1/2-inch NPT inlet |
| Electrical Supply | 120V / 60Hz / 3A |
| Dimensions (H x W x D) | 28.5 x 24 x 36.5 inches |
| Weight | 150 lbs (empty) |
| Mounting | Outdoor installation on level pad |
| Certification | ANSI Z21.56 / CSA 4.97 |
| Warranty | 5-year heat exchanger, 1-year parts |
| Maintenance | Clean water filter and burner assembly periodically |
| Safety Features | Thermal fuse, pressure relief valve, flame sensor |
Frequently Asked Questions - JUVLP200 Jandy
What type of gas does the Jandy JUVLP200 pool heater use?
The Jandy JUVLP200 is designed for liquid propane gas. Do not use natural gas unless the unit is converted with a factory-approved conversion kit.
How often should I clean the pool heater's filter?
Clean or backwash the pool filter at least once a month during the swimming season. A dirty filter reduces water flow, which can cause the heater to overheat or shut down.
Can the JUVLP200 be installed indoors?
No, the Jandy JUVLP200 is an outdoor model only. Installing indoors requires special venting and may violate safety regulations. Always place it outdoors in a well-ventilated area.
What is the recommended water flow rate for this heater?
The heater requires a minimum flow rate of 30 gallons per minute (GPM) to prevent overheating. Check the pressure differential across the heat exchanger to verify proper flow.
How do I winterize the JUVLP200?
Drain all water from the heat exchanger and manifold using the drain plugs. Disconnect the gas supply and cover the unit with a weatherproof cover. In freezing climates, add antifreeze if required.
What maintenance does the heat exchanger need?
Periodically inspect the heat exchanger for debris and corrosion. For saltwater pools, ensure the sacrificial anode is intact. Flush the exchanger with fresh water after extended use.
How can I reset the heater after a fault code appears?
Press the power button on the control panel to cycle off and on. If the fault persists, record the error code and consult the manual for troubleshooting. After correcting the issue, reset the internal breaker if necessary.
Is the JUVLP200 compatible with saltwater pools?
Yes, the heat exchanger is made of corrosion-resistant materials such as titanium or cupronickel. However, maintain proper salt levels and inspect the grounding bond to prevent electrolysis.
What is the expected lifespan of the JUVLP200?
With regular maintenance, a Jandy pool heater can last 10-15 years. Factors such as water chemistry, usage hours, and electrical storms affect longevity.
Does the heater require special ventilation?
As an outdoor unit, it needs clearances of at least 5 ft from combustible surfaces and 3 ft from any exhaust opening. The forced draft system handles exhaust, but keep the area free of leaves and debris.
User questions about JUVLP200 Jandy
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual JUVLP200 - Jandy and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. JUVLP200 by Jandy.
USER MANUAL JUVLP200 Jandy
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Jandy
Model : JUVLP200
Category : Uncategorized