Levolor K-2000 - Uncategorized Jandy - Free user manual and instructions
Find the device manual for free Levolor K-2000 Jandy in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Automatic Pool Cleaner |
| Brand | Jandy |
| Model | Levolor K-2000 |
| Dimensions (L x W x H) | 12 x 12 x 6 inches |
| Weight | 10 lbs |
| Power Supply | 24V DC, 2.5A |
| Maximum Coverage | Up to 50 ft of hose length |
| Filtration Capacity | Fine mesh filter bag, 150 microns |
| Main Functions | Scrubs walls and floor; collects leaves, dirt, and debris; programmable cleaning cycles |
| Control Type | Automatic with optional remote control |
| Material | ABS plastic body with rubber brushes |
| Suitable Pool Types | In-ground and above-ground pools up to 40 ft |
| Water Temperature Range | 50°F to 104°F |
| Safety Features | Automatic shut-off if out of water; GFCI compatible |
| Maintenance | Clean filter bag after each use; inspect brushes monthly; store in cool, dry place |
| Spare Parts Availability | Replacement brushes, filter bags, wheels, hose connectors, and motor assembly |
| Repairability | Modular design with user-replaceable parts; service manual available |
| Warranty | 2 years limited warranty |
| Included Accessories | Power supply, 40 ft hose, filter bag, user manual |
Frequently Asked Questions - Levolor K-2000 Jandy
How do I install the Levolor K-2000 pool cleaner?
Connect the power supply to a GFCI outlet, attach the hose to the cleaner and the pool return fitting, then submerge the cleaner and turn it on. Refer to the manual for detailed steps.
Why is my Levolor K-2000 not moving?
Check if the filter bag is full or clogged. Also ensure the power supply is connected and the hose is not tangled. If still not moving, inspect the brushes and wheels for obstructions.
How often should I clean the filter bag?
Clean the filter bag after every cleaning cycle or when the cleaner slows down. Rinse with a garden hose and allow to dry before reusing.
Can I use the Levolor K-2000 in an above-ground pool?
Yes, the Levolor K-2000 is suitable for above-ground pools up to 40 feet. Ensure the hose length is appropriate and the pool wall is smooth.
What type of power outlet do I need?
The cleaner requires a standard GFCI outlet (120V AC) for the power supply. Do not use an extension cord.
How do I replace the brushes on the Levolor K-2000?
Turn off and unplug the cleaner. Use a screwdriver to remove the brush retaining clips, slide out old brushes, and insert new ones. Tighten clips securely.
My cleaner keeps climbing the walls but not cleaning the floor. What should I do?
Adjust the cleaner's internal flow regulator or reduce the pump speed. If the problem persists, check for worn brushes or a damaged hose.
Is the Levolor K-2000 safe for vinyl pool liners?
Yes, the cleaner is safe for vinyl liners. The brushes are soft rubber and will not damage the liner when used correctly.
Can I leave the Levolor K-2000 in the pool all the time?
We recommend removing the cleaner from the pool after each cycle to prolong its life. Continuous exposure to chemicals may damage components.
Where can I buy spare parts for the Levolor K-2000?
Spare parts are available from Jandy authorized dealers or online retailers. Use the part numbers listed in the manual to ensure compatibility.
User questions about Levolor K-2000 Jandy
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual Levolor K-2000 - Jandy and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Levolor K-2000 by Jandy.
USER MANUAL Levolor K-2000 Jandy
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Jandy
Model : Levolor K-2000
Category : Uncategorized