Omada SM5110LSB-10 - Network TP-LINK - Free user manual and instructions
Find the device manual for free Omada SM5110LSB-10 TP-LINK in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | TP-Link |
| Model | Omada SM5110LSB-10 |
| Product Type | 10GBASE-LR SFP+ Fiber Optic Transceiver |
| Category | Network |
| Connector Type | LC Duplex |
| Fiber Type | Single-mode (OS2) |
| Wavelength | 1310 nm |
| Data Transfer Rate | 10 Gbps |
| Maximum Transmission Distance | 10 km |
| Interface | SFP+ (Small Form-factor Pluggable Plus) |
| Power Supply | 3.3V DC |
| Power Consumption | Less than 1.5W |
| Digital Diagnostics Monitoring (DDMI) | Yes |
| Operating Temperature | 0°C to 70°C |
| Storage Temperature | -40°C to 85°C |
| Dimensions | 55.2 mm x 13.8 mm x 9.0 mm |
| Weight | 60 g |
| Maintenance | Clean optical connectors with appropriate tools; inspect for dust or scratches. |
| Safety | Class 1 Laser product, compliant with FDA/CDRH standards. |
| Spare Parts and Repairability | No user-serviceable parts. Contact TP-Link support for replacement. |
| Warranty | 3 years limited warranty (depending on region) |
Frequently Asked Questions - Omada SM5110LSB-10 TP-LINK
What is the TP-Link Omada SM5110LSB-10?
This is a 10GBASE-LR SFP+ module designed for long-range fiber connections up to 10 km, compatible with Omada switches and other SFP+ ports.
What fiber optic cable should I use?
Use single-mode fiber (OS2) with LC duplex connectors to achieve distances up to 10 km.
Does it support hot swapping?
Yes, the module supports hot insertion and removal, allowing you to install or replace it without powering off the switch.
Which switches are compatible with this module?
The module is designed for TP-Link Omada switches with SFP+ slots, but it can also work with third-party switches supporting standard SFP+ interfaces.
What does DDMI mean and why is it important?
DDMI (Digital Diagnostics Monitoring) provides real-time temperature, voltage, TX/RX power, and other parameters for proactive network management.
How do I install the module?
Power down or unplug the SFP+ slot, insert the module gently until it clicks, then connect the fiber optic cables with LC connectors. Verify the link LEDs.
What should I do if the link does not establish?
Clean the fiber connectors, verify the fiber type and length, check the switch configuration (e.g., speed and duplex), and test with a known-good fiber.
How should I clean the optical connectors?
Use a lint-free wipes and a ferrule cleaner or compressed air for dust. Avoid touching the end faces with fingers.
What are its typical power requirements?
It operates on a standard 3.3V SFP+ interface and consumes less than 1.5W, making it energy efficient.
Is this module a laser product? What safety precautions apply?
Yes, it is a Class 1 laser, which is safe under normal use. However, never look directly into the fiber connectors or the transmitter port.
User questions about Omada SM5110LSB-10 TP-LINK
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network in PDF format for free! Find your manual Omada SM5110LSB-10 - TP-LINK and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Omada SM5110LSB-10 by TP-LINK.
USER MANUAL Omada SM5110LSB-10 TP-LINK
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : TP-LINK
Model : Omada SM5110LSB-10
Category : Network