DCV-10 - Voltmeter ENTES - Free user manual and instructions
Find the device manual for free DCV-10 ENTES in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Voltmeter |
| Brand | ENTES |
| Model | DCV-10 |
| Measurement Range | 0–10 V DC |
| Input Impedance | ≥1 MΩ |
| Accuracy | ±0.5% of full scale |
| Resolution | 0.01 V |
| Display | 3-digit LED |
| Power Supply | 110–230 V AC, 50/60 Hz |
| Power Consumption | ≤5 VA |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Dimensions (W×H×D) | 72 mm × 72 mm × 100 mm |
| Panel Cutout | 68 mm × 68 mm |
| Weight | Approximately 300 g |
| Protection Degree | IP54 (front panel) |
| Installation | Panel mounting, screw terminals |
| Safety Compliance | EN 61010-1, CE marked |
| Overvoltage Protection | Up to 300 V CAT II |
| Cleaning | Wipe with a dry cloth; avoid solvents |
| Maintenance | Periodically verify connections and accuracy |
| Spare Parts | Not user-replaceable; contact ENTES for service |
| Repairability | Repairs only by authorized service center |
| General Information | Designed for industrial and electrical panel applications |
Frequently Asked Questions - DCV-10 ENTES
How do I connect the ENTES DCV-10 voltmeter to measure voltage?
Connect the positive wire of the circuit to the V+ terminal and the negative wire to the V- terminal. The DCV-10 measures DC voltage in parallel, so it does not interrupt the circuit.
What is the maximum input voltage for the DCV-10?
The maximum input voltage is 10 V DC. Exceeding this value can damage the device. Never connect the voltmeter directly to mains or high-voltage circuits.
Does the DCV-10 require an external power supply for its operation?
Yes, the display and internal circuitry require a separate power supply of 110–230 V AC, 50/60 Hz. The measuring input is isolated from the power supply.
Can I measure AC voltage with the DCV-10?
No, the DCV-10 is designed exclusively for direct current (DC) voltage measurement. For AC voltage, consider a compatible AC voltmeter or a multimeter.
How accurate is the DCV-10 voltmeter?
The accuracy is ±0.5% of full scale. This means for a 10 V range, the measurement error is within ±0.05 V under standard conditions.
What do I need to check during maintenance of the DCV-10?
Regularly inspect the terminal connections for tightness and check the display for any abnormal reading. It is recommended to verify accuracy with a known calibration source.
Is the ENTES DCV-10 suitable for outdoor installation?
The device has a front panel IP54 rating, meaning it is dust-protected and splash-proof. For outdoor use, it should be placed inside a suitable enclosure that prevents direct exposure.
Can the DCV-10 be repaired if it fails?
The DCV-10 does not contain user-serviceable parts. If a fault occurs, contact ENTES technical support or an authorized service center. Do not open the device, as this voids the warranty.
How do I clean the voltmeter without damaging it?
Use a soft dry cloth to wipe the front panel. Avoid abrasive cleaners and solvents, as they may damage the plastic housing and the display window.
What are the operating temperature limits for the DCV-10?
The device operates reliably in temperatures from 0°C to 50°C. Storage is allowed from -20°C to 70°C. Avoiding extreme thermal conditions ensures measurement performance and long life.
User questions about DCV-10 ENTES
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Voltmeter in PDF format for free! Find your manual DCV-10 - ENTES and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DCV-10 by ENTES.
USER MANUAL DCV-10 ENTES
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ENTES
Model : DCV-10
Category : Voltmeter