ATLAS

ALS-LFI350 - Loudspeaker ATLAS - Free user manual and instructions

Find the device manual for free ALS-LFI350 ATLAS in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ATLAS ALS-LFI350 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Floor-standing loudspeaker
Brand ATLAS
Model ALS-LFI350
Speaker Configuration 2-way bass reflex
Frequency Response 40 Hz - 20 kHz
Impedance 8 ohms
Sensitivity 88 dB (2.83V/1m)
Power Handling (RMS) 150 W
Peak Power 300 W
Drivers 1 inch tweeter, 6.5 inch woofer
Enclosure Material MDF (Medium Density Fiberboard)
Dimensions (W x H x D) 210 mm x 350 mm x 280 mm
Weight 7.2 kg per speaker
Color Black ash wood grain finish
Mounting Floor-standing with rubber feet
Connectors Dual binding posts for bi-wiring
Main Functions High-fidelity stereo sound reproduction, bass reflex port for extended low frequencies
Maintenance Wipe with a soft dry cloth; avoid moisture and polish
Safety Do not place near heat sources or in damp areas; keep away from direct sunlight
Spare Parts Replaceable tweeter and woofer; detachable grille
General Information Designed for stereo home audio systems, magnetically shielded to avoid interference with CRTs

Frequently Asked Questions - ALS-LFI350 ATLAS

How do I connect the ALS-LFI350 speaker to my amplifier?
Use the dual binding posts on the back of the speaker. Connect the amplifier's speaker wire to the terminals, ensuring positive to positive and negative to negative. For bi-wiring, remove the metal jumpers and use separate cables for the tweeter and woofer sections.
What is the impedance of the ATLAS ALS-LFI350?
The impedance is 8 ohms, which is compatible with most home amplifiers and receivers. Always check your amplifier's specifications to ensure it can drive 8-ohm loads.
How should I clean my loudspeaker?
Turn off the speaker and let it cool down. Wipe the cabinet with a soft dry cloth. Do not use water, solvents, or abrasive cleaners. For the grille, gently vacuum with a brush attachment if needed.
Can I use the ALS-LFI350 outdoors?
No, this speaker is designed for indoor use only. Exposure to moisture, extreme temperatures, or direct sunlight can damage the cabinet and drivers. Keep it in a dry, temperature-controlled room.
What type of amplifier is recommended for this speaker?
An amplifier with 25 to 150 watts per channel at 8 ohms is suitable. Avoid using low-power or high-power mismatches; too little power can cause clipping, while excessive power may damage the drivers.
How far from the wall should I place the speakers?
For optimal bass response, place the speakers at least 20 to 30 cm away from the back wall. The bass reflex port is on the rear, so leaving space allows proper air flow and reduces boomy sound.
Why is there no sound coming from my speaker?
Check the connections: ensure the speaker wires are securely attached to both the amplifier and the binding posts. Verify that the amplifier is set to the correct output channel and not muted. Also confirm the balance control is centered.
Can I wall-mount this speaker?
No, the ATLAS ALS-LFI350 is a floor-standing speaker and is not designed for wall mounting. It should be placed on a stable, level surface or on its included rubber feet on the floor.
What should I do if the sound is distorted?
Distortion often occurs when the amplifier is overdriven. Lower the volume to a level below the clipping point. Also, be sure the speaker is not placed too close to a corner, which can cause excessive bass and muddy midrange.
Is the speaker magnetically shielded?
Yes, the ALS-LFI350 is magnetically shielded, reducing interference with older CRT televisions or monitors. However, for modern flat screens, it is not necessary but still safe to place nearby.

User questions about ALS-LFI350 ATLAS

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual ALS-LFI350 - ATLAS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ALS-LFI350 by ATLAS.

USER MANUAL ALS-LFI350 ATLAS

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ATLAS

Model : ALS-LFI350

Category : Loudspeaker