ALA5T - Loudspeaker ATLAS - Free user manual and instructions
Find the device manual for free ALA5T ATLAS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | Atlas |
| Model | ALA5T |
| Category | Audio Equipment |
| Speaker Type | 2-way bookshelf |
| Woofer Size | 5 inches |
| Tweeter Size | 1 inch |
| Frequency Response | 55 Hz - 20 kHz |
| Impedance | 8 ohms |
| Sensitivity | 87 dB (1W/1m) |
| Power Handling (RMS) | 50 W |
| Peak Power | 100 W |
| Recommended Amplifier | 20 - 80 W per channel |
| Enclosure Type | Bass reflex (ported) |
| Connectivity | Wired binding posts |
| Dimensions (H x W x D) | 300 x 180 x 220 mm |
| Weight | 4.5 kg each |
| Finish | Black ash vinyl |
| Placement | Bookshelf or stand mount |
| Cleaning | Wipe with dry cloth |
| Safety | Keep away from moisture |
| Spare Parts | Drivers available through service center |
| Repair | Contact certified service center |
| Manual | PDF download available |
Frequently Asked Questions - ALA5T ATLAS
How do I connect the ALA5T loudspeaker to my amplifier?
Connect the speaker cables from your amplifier to the binding posts on the back of the ALA5T. Ensure the positive (red) and negative (black) terminals match the amplifier outputs. For better performance, use quality cables and tighten the posts securely.
What is the recommended amplifier power for the ALA5T?
The ALA5T is rated for amplifiers delivering between 20 and 80 watts per channel. This range ensures clean power without distortion and protects the speaker from damage.
Can I use the ALA5T as part of a home theater system?
Yes, the ALA5T can be used as front or rear speakers in a home theater setup. Pair it with a compatible center channel and subwoofer for a complete surround sound experience.
How should I position the speakers for the best sound?
Place the speakers at ear level and angle them toward the listening position. Keep them at least 20 cm away from walls to avoid excessive bass reflections. Experiment with the distance between speakers to achieve a balanced soundstage.
How do I clean and maintain the loudspeaker?
Use a soft, dry cloth to wipe the cabinet and drivers. Avoid using water or chemical cleaners, as they may damage the finish and components. Regularly check and tighten the binding posts.
What is the impedance of the ALA5T and can it work with my receiver?
The ALA5T has an impedance of 8 ohms, which is compatible with most home stereo receivers and amplifiers. Ensure your amplifier supports 8-ohm loads.
Does the speaker require a burn-in period?
While not mandatory, a burn-in period of 20-30 hours can help the drivers deliver optimal performance. Play music at moderate levels during this time.
Can I bi-wire the ALA5T?
The ALA5T is designed with a single pair of input terminals, so bi-wiring is not possible. However, you can use bi-amping if you purchase an external crossover, which is uncommon for this model.
Is the ALA5T magnetic shielded?
We recommend keeping the speaker away from CRT TVs and magnetic media, as the ALA5T is not fully magnetically shielded. However, it is safe to use near modern LCD or LED screens.
What should I do if there is no sound coming from the speaker?
Verify that the amplifier is on and the correct input is selected. Check the speaker connections and ensure the wires are not shorted. Also, test with another speaker or cable to isolate the issue. If the problem persists, contact technical support.
User questions about ALA5T ATLAS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual ALA5T - ATLAS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ALA5T by ATLAS.