FAP6260T - Loudspeaker ATLAS - Free user manual and instructions
Find the device manual for free FAP6260T ATLAS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Loudspeaker |
| Brand | Atlas |
| Model | FAP6260T |
| Speaker Type | 2-way bass reflex loudspeaker |
| Woofer | 6.5-inch (165 mm) coated paper cone |
| Tweeter | 1-inch (25 mm) dome tweeter |
| Frequency Response | 65 Hz to 20 kHz |
| Impedance | 8 ohms |
| Power Handling (RMS) | 60 W |
| Peak Power Handling | 120 W |
| Sensitivity | 90 dB SPL @ 1 W/1 m |
| Dispersion (H x V) | 90° x 60° |
| Enclosure Design | Ported (bass reflex) with steel grille |
| Mounting | U-shaped bracket for wall or ceiling mounting |
| Connectors | 4-position barrier strip or Speakon compatible |
| Dimensions (W x H x D) | 200 x 300 x 210 mm (7.9 x 11.8 x 8.3 in) |
| Weight | 4.2 kg (9.3 lb) |
| Housing Material | Impact-resistant ABS plastic |
| Finish | Black textured |
| Recommended Amplifier | 30 W to 120 W RMS per channel at 8 ohms |
| Application | Commercial sound, retail, education, houses of worship |
Frequently Asked Questions - FAP6260T ATLAS
What is the Atlas FAP6260T loudspeaker?
The Atlas FAP6260T is a compact 2-way passive loudspeaker designed for commercial sound applications, offering clear speech and music reproduction.
What type of enclosure does the FAP6260T have?
It features a ported (bass reflex) enclosure that enhances low-frequency output, providing a deeper bass response suitable for background music and paging.
How do I connect the FAP6260T to an amplifier?
Use the speaker's barrier strip or Speakon connector. Connect the amplifier's positive wire to the red terminal and negative to the black terminal. Ensure the amplifier is turned off during wiring.
What amplifier power is recommended?
A recommended amplifier is between 30 W and 120 W RMS per channel at 8 ohms. Matching this range will deliver optimal performance without risking speaker damage.
Can the FAP6260T be used outdoors?
The speaker is weather-resistant when mounted properly, but for continuous outdoor exposure, we recommend a dedicated weatherproof model. It is best used in protected outdoor areas.
What is the impedance of the FAP6260T?
The nominal impedance is 8 ohms. This allows multiple speakers to be connected in parallel while staying within typical amplifier load requirements.
Is the FAP6260T a 100V line speaker?
This model is the low-impedance (8 ohm) version. If you need a 100V line speaker for distributed audio systems, check the Atlas FAP6260T/100 variant or use an external line transformer.
How should I clean and maintain the speaker?
Use a soft, dry cloth to wipe the enclosure. Do not expose the speaker to water or cleaning solvents. Periodically check that the mounting bracket and connections are secure.
Is the FAP6260T suitable for wall mounting?
Yes, it comes with a U-shaped bracket that allows flexible wall or ceiling mounting. Ensure the bracket is fixed to a solid wall or support using appropriate screws and anchors.
How can I get spare parts or repair service?
Contact an Atlas authorized dealer or service center. The speaker is designed to be repairable, and replaceable components such as the tweeter and woofer are available.
User questions about FAP6260T ATLAS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual FAP6260T - ATLAS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FAP6260T by ATLAS.
USER MANUAL FAP6260T ATLAS
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ATLAS
Model : FAP6260T
Category : Loudspeaker