8329 - Uncategorized Kyoritsu - Free user manual and instructions
Find the device manual for free 8329 Kyoritsu in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Digital Multimeter |
| Display | LCD, 4000 counts |
| DC Voltage Range | 0.1 mV to 600 V |
| AC Voltage Range | 0.1 mV to 600 V |
| Resistance Range | 0.1 Ω to 40 MΩ |
| Capacitance Range | 1 nF to 4000 µF |
| Frequency Range | 1 Hz to 10 MHz |
| Diode Test | Yes |
| Continuity Buzzer | Yes |
| Auto Range | Yes |
| Safety Rating | CAT III 600 V |
| Power Supply | 2 x AAA batteries |
| Dimensions | Approx. 130 x 72 x 35 mm |
| Weight | Approx. 150 g |
| Operating Temperature | 0 °C to 40 °C |
| Storage Temperature | -10 °C to 50 °C |
| Accessories Included | Test leads, batteries, manual |
| Maintenance | Wipe with dry cloth; no solvents |
| Repairability | Fuse replacement available; do not disassemble unnecessarily |
| General Information | Auto power-off, data hold |
Frequently Asked Questions - 8329 Kyoritsu
What is the maximum voltage that can be measured with the Kyoritsu 8329?
The Kyoritsu 8329 is rated for CAT III 600 V, meaning it can safely measure voltages up to 600 V AC/DC in appropriate categories.
How do I measure DC voltage with this meter?
Turn the dial to the V DC position, connect the test leads (red to V/Ω, black to COM), and touch the test probes to the circuit. The LCD display will show the voltage value.
What does "OL" mean on the display?
"OL" stands for Overload or out of range. It indicates that the measured value exceeds the selected range or the meter's maximum limit.
How do I replace the batteries?
Turn off the meter and remove the test leads. Open the battery compartment on the back cover. Replace the two AAA batteries, ensuring correct polarity, and close the cover.
Can I measure capacitance with this model?
Yes, the Kyoritsu 8329 includes a capacitance measurement function with a range from 1 nF to 4000 µF.
How do I use the data hold function?
Press the HOLD button to freeze the current reading on the display. Press it again to release the hold and resume live measurements.
What safety precautions should I take when using this multimeter?
Always observe the CAT III 600 V rating, use proper test leads, and never measure voltages exceeding the specified limits. Inspect the meter and leads for damage before use.
How should I clean the equipment?
Wipe the exterior with a dry soft cloth. Do not use solvents or water, and keep the terminals clean and free of dust.
Does the meter have an auto power-off feature?
Yes, the auto power-off function activates the meter into sleep mode after approximately 15 minutes of inactivity to conserve battery life.
How do I perform a continuity test?
Turn the dial to the continuity setting. Connect the test leads and touch the probes to the circuit. If the resistance is below approximately 50 Ω, the buzzer will sound.
User questions about 8329 Kyoritsu
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual 8329 - Kyoritsu and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 8329 by Kyoritsu.
USER MANUAL 8329 Kyoritsu
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Kyoritsu
Model : 8329
Category : Uncategorized