009MXARM01 - Automatisme CAME - Free user manual and instructions
Find the device manual for free 009MXARM01 CAME in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Control panel for automatic gates |
| Brand | CAME |
| Model | 009MXARM01 |
| Dimensions | Approx. 200 x 150 x 80 mm |
| Weight | Approx. 1 kg |
| Power Supply | 230V AC ±10%, 50/60 Hz |
| Motor Output | 2 x up to 800 W (single-phase) |
| Accessory Output | 24V AC/DC for photocells, safety edges and electric locks |
| Inputs | Photocells, safety edges, limit switches, push buttons |
| Outputs | Motors, flashing light, electric lock, courtesy light |
| Radio Compatibility | Compatible with CAME TOP-432SA and TOP-434SA transmitters |
| Operating Temperature | -20°C to +55°C |
| Protection Class | IP55 (weatherproof housing) |
| Control Functions | Step-by-step, semi-automatic, dead-man, automatic closing with adjustable pause |
| Safety Features | Obstacle detection, safety edge input, photocell control, auto-close timer |
| Programming | Via dip switches and trimmer potentiometers on the panel |
| Mounting | Wall mount, suitable for indoor or outdoor use |
| Standards Compliance | CE certified, complies with EN 13241-1 for gate automation |
| Maintenance | Periodically check wiring and connections; clean the enclosure with a dry cloth |
| Cleaning | Use a soft damp cloth; avoid solvents or abrasive cleaners |
| Spare Parts | Available through authorized CAME dealers for long-term serviceability |
| Repair | Repairable; always have qualified technicians perform repairs to ensure safety |
Frequently Asked Questions - 009MXARM01 CAME
How do I connect the control panel to my gate motor?
The ARM01 control panel has clearly marked terminals for motor connections. Typically, you connect the common wire, open wire, and close wire from each motor to the corresponding MOTOR terminals. Always ensure the power is disconnected before wiring.
What power supply is required?
The panel operates on 230V AC ±10% with a frequency of 50/60 Hz. It is designed for standard household mains power, but a proper circuit breaker should be installed.
Can I use any remote control with this panel?
The panel has an internal or optional radio receiver that is compatible with CAME TOP series transmitters, such as the TOP-432SA and TOP-434SA. For other brands, you may need an external relay interface.
How do I set the auto-close time?
Use the TC trimmer on the panel to adjust the automatic closing delay. Turning it clockwise increases the pause time, while counterclockwise decreases it. The typical range is 1-120 seconds.
What safety devices are compatible?
The panel supports photocells, safety edges, and a stop input. These devices must be connected to the designated terminals and are essential for protecting people and property.
The gate opener does not respond to the remote control, what should I check?
First, verify the remote control battery and that the transmitter is paired. Check the receiver antenna position and ensure the radio channel is not blocked. Also, inspect the LED status on the panel for error codes.
How do I reset the control panel?
To perform a full reset, switch off the power, wait 10 seconds, then power on while pressing and holding the P1 button for 5 seconds. Release the button; the panel will restore factory settings.
Is this control panel suitable for sliding gates?
Yes, the ARM01 is compatible with both swing and sliding gates when configured correctly. Use the dip switches to select the appropriate logic and motor type.
What maintenance is required?
Regularly check all connections and wiring for corrosion or looseness. Keep the enclosure clean and ensure the ventilation slots are free from dust. Test the safety devices monthly.
Can I install it outdoors?
Yes, the panel has an IP55 rated housing that protects against dust and water jets. However, direct exposure to heavy rain should be minimized, so a protective cover is recommended.
User questions about 009MXARM01 CAME
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Automatisme in PDF format for free! Find your manual 009MXARM01 - CAME and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 009MXARM01 by CAME.
USER MANUAL 009MXARM01 CAME
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : CAME
Model : 009MXARM01
Category : Automatisme