Tyxal+ DME - Motion detector DELTA DORE - Free user manual and instructions
Find the device manual for free Tyxal+ DME DELTA DORE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Motion Detector |
| Brand | Delta Dore |
| Model | Tyxal+ DME |
| Category | Security Sensor |
| Detection Technology | Passive Infrared (PIR) |
| Detection Range | Up to 12 meters at 90° |
| Power Supply | 12 V DC |
| Operating Temperature | -10°C to +55°C |
| Dimensions (H x W x D) | 105 x 60 x 45 mm |
| Weight | 85 g |
| Mounting | Wall mount with pivoting bracket |
| Alarm Output | Relay NC/NO + tamper output |
| Sensitivity Adjustment | Potentiometer with 3 steps |
| Pet Immunity | Up to 25 kg |
| Tamper Protection | Tamper switch for cover and wall removal |
| LED Indication | Red LED for alarm and test mode |
| Installation | Indoor use only |
| Standards | Complies with EN 50131-1, Grade 2 |
| Maintenance | Clean the lens with a soft, dry cloth |
| Spare Parts | Not available as separate components; replace the unit |
| Repairability | Not user-serviceable; contact Delta Dore support |
Frequently Asked Questions - Tyxal+ DME DELTA DORE
How do I install the Delta Dore Tyxal+ DME motion detector?
Mount the detector on a wall at a height of 2.2 to 2.5 meters. Ensure the detection zone covers the area to be monitored. Connect the wiring to the 12 V DC power supply and the alarm output. Fix the bracket securely and adjust the angle.
What is the detection range of the Tyxal+ DME?
The Tyxal+ DME detects motion up to 12 meters with a 90° detection angle when installed correctly.
Can I set the sensitivity of the motion detector?
Yes, the detector has a sensitivity adjustment potentiometer with three levels. Use it to reduce false alarms caused by small animals or environmental factors.
What is the power supply requirement?
The Tyxal+ DME requires a 12 V DC power supply. It is typically powered by the control panel of the alarm system.
Does the detector have pet immunity?
Yes, the detector can ignore movements from pets up to 25 kg if the sensitivity is correctly adjusted.
What does the LED indicator mean?
The red LED lights up when motion is detected, especially in test mode. In normal operation, the LED can be disabled to remain discreet.
Is the Tyxal+ DME suitable for outdoor use?
No, this detector is designed for indoor installation only. Outdoor use may cause malfunctions and reduce lifespan.
How do I clean the motion detector?
Turn off the power before cleaning. Use a soft, dry cloth to wipe the lens and the housing. Do not use solvents or water.
What should I do if the detector triggers false alarms?
Check for heat sources, reflective surfaces, or moving branches near the window. Adjust the sensitivity using the potentiometer and reposition the detector if necessary.
Can I connect the detector to an existing alarm system?
Yes, the Tyxal+ DME provides a relay output (normally closed or normally open) and a tamper output, compatible with most Delta Dore and third-party alarm control panels.
User questions about Tyxal+ DME DELTA DORE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Motion detector in PDF format for free! Find your manual Tyxal+ DME - DELTA DORE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Tyxal+ DME by DELTA DORE.
USER MANUAL Tyxal+ DME DELTA DORE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : DELTA DORE
Model : Tyxal+ DME
Category : Motion detector