HMIPW-FAL24-C10 - Home Automation Homematic IP - Free user manual and instructions
Find the device manual for free HMIPW-FAL24-C10 Homematic IP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless floor heating actuator for smart home systems |
| Brand | Homematic IP |
| Model | HMIPW-FAL24-C10 |
| Number of Channels | 10 channels for controlling electrothermal valve actuators |
| Supply Voltage | 24 V DC (external power supply) |
| Wireless Protocol | Homematic IP (868 MHz) |
| Radio Range | Up to 100 m free field, typical 20-30 m inside buildings |
| Power Consumption | Max 1 W standby, output per channel up to 2 A |
| Mounting Type | DIN rail mounting in distribution cabinet |
| Dimensions | Approx. 360 x 90 x 60 mm (10 modules width) |
| Weight | Approx. 600 g |
| Protection Rating | IP20 (indoor use only) |
| Ambient Operating Temperature | 0 °C to +40 °C |
| Functions | Control of electrothermal valves, individual room temperature control, heating/cooling mode switch, manual override |
| Compatibility | All Homematic IP access points and Homematic IP ceiling/room thermostats |
| Maintenance | No regular maintenance required; keep dust-free and dry |
| Cleaning | Wipe with a dry soft cloth; do not use solvents |
| Safety | Safe isolation via built-in fuse; only operate in intact housing |
| Spare Parts and Repair | Repairable; spare parts available through Homematic IP service |
| Package Contents | Actuator, power supply unit, quick start guide, safety instructions |
Frequently Asked Questions - HMIPW-FAL24-C10 Homematic IP
How do I pair the Homematic IP HMIPW-FAL24-C10 with an access point?
To pair the HMIPW-FAL24-C10, open the Homematic IP app on your smartphone and go to 'Add Device'. Put the access point into pairing mode, then press and hold the button on the actuator for 3 seconds. The LED will blink and the device will be registered automatically. Follow the on-screen instructions to assign it to a room.
Which electrothermal valve drives are compatible with this actuator?
The HMIPW-FAL24-C10 is designed to control electrothermal valve drives with an operating voltage of 24V AC/DC and a maximum current of 2A per channel. It is compatible with most standard 24V thermo motors, e.g. from Danfoss or Oventrop.
Can I use the device for cooling (e.g., underfloor cooling) as well as heating?
Yes, the actuator supports switching between heating and cooling mode. You can set the operating mode via the Homematic IP app. In cooling mode, the logic for controlling the valves is inverted to suit the cooling application.
What is the maximum cable length from the actuator to the valve drive?
The maximum cable length depends on the wire gauge. For 24V valve drives, we recommend a cable cross-section of at least 0.5 mm². With this, distances up to 50 m are feasible. For longer runs, use a thicker cable to avoid voltage drop.
Does the HMIPW-FAL24-C10 have a manual override option?
Yes, each channel has a manual override switch on the device. You can toggle it to manually open or close the valve, overriding the automatic control. This is useful for commissioning or emergencies.
How do I perform a factory reset?
To reset the device to factory settings, disconnect the power supply, press and hold the pairing button, and reconnect the power. Keep holding the button for 10 seconds until the LED lights up orange. The device will restart and all settings will be cleared. It then can be paired again.
Can I create weekly schedules for temperature control?
Yes, once integrated into the Homematic IP system, you can use the app to create individual time profiles (e.g., weekdays/weekends) and temperature setpoints for each room. The actuator will receive the commands from the thermostat or the access point.
What should I do if the device does not respond to the access point?
Check the power supply, the LED status, and the radio range. Try moving the access point closer or use a Homematic IP repeater. Make sure the device is not in pairing mode. Power cycle the device. If it still fails, perform a factory reset and re-pair.
Is the Homematic IP HMIPW-FAL24-C10 compatible with open systems like Home Assistant?
Yes, through the HomematicIP Cloud or RaspberryMatic (CCU3) interface, the device can be integrated into Home Assistant, ioBroker, or other open smart home software. Use the Homematic IP Add-on or bind the CCU3.
How do I mount the actuator on a DIN rail?
The device has a standard DIN rail clip. Simply press it onto the 35 mm top-hat rail in your distribution cabinet until you hear a click. Ensure the device is correctly oriented with the channel labels facing up. For disassembly, pull down the clip using a screwdriver.
User questions about HMIPW-FAL24-C10 Homematic IP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Home Automation in PDF format for free! Find your manual HMIPW-FAL24-C10 - Homematic IP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HMIPW-FAL24-C10 by Homematic IP.
USER MANUAL HMIPW-FAL24-C10 Homematic IP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : Homematic IP
Model : HMIPW-FAL24-C10
Category : Home Automation