730HTP70M - Pump FLUKE - Free user manual and instructions
Find the device manual for free 730HTP70M FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Hydraulic Pressure Test Pump |
| Brand | Fluke |
| Model | 730HTP70M |
| Maximum Pressure | 70 MPa (700 bar) |
| Pressure Connection | 1/4" BSP female |
| Hydraulic Fluid | Mineral hydraulic oil (ISO VG 32 or similar) |
| Reservoir Capacity | 250 ml |
| Pump Type | Dual-stage: piston and fine adjustment |
| Operating Temperature | 0 °C to 50 °C |
| Storage Temperature | -20 °C to 70 °C |
| Dimensions (L x W x H) | 300 mm x 180 mm x 350 mm |
| Weight | 6.5 kg |
| Power Supply | Manual, no external power required |
| Main Functions | Pressure generation, fine adjustment, quick pressure release |
| Fine Adjustment Hand Wheel | For precise pressure setting |
| Pressure Release Valve | Built-in for safe venting |
| Maintenance | Clean and lubricate moving parts; replace hydraulic oil as needed |
| Safety | Use approved high-pressure hoses; wear safety glasses; never exceed max rating |
| Repairability | Spare parts such as seals, pistons, and check valves available; service by qualified technicians |
| General Information | Designed for field calibration with Fluke pressure calibrators |
Frequently Asked Questions - 730HTP70M FLUKE
What is the maximum pressure of the Fluke 730HTP70M?
The maximum pressure is 70 MPa (700 bar).
How do I fill the reservoir with hydraulic fluid?
Open the reservoir cap and fill with a mineral hydraulic oil such as ISO VG 32 until the level is inside the acceptable window. Avoid overfilling.
How do I connect the pump to a pressure calibrator?
Use a high-pressure hose with a 1/4' BSP fitting. Tighten the connection firmly, but do not use tools to overtighten. Ensure the release valve is closed before pressurizing.
What type of hydraulic fluid should I use?
Use a mineral-based hydraulic oil with a viscosity grade of ISO VG 32 or equivalent. Do not use water, solvents, or flammable fluids.
How often should I clean and maintain the pump?
Clean the exterior after each use and inspect seals regularly. Perform a full maintenance check at least once a year, including replacing o-rings and hydraulic oil if contaminated.
How do I release pressure after testing?
Open the pressure release valve slowly to vent hydraulic fluid back into the reservoir. Always release pressure fully before disconnecting hoses or removing the gauge.
Can I use the pump for water or other fluids?
No. The pump is designed for mineral hydraulic oil. Using incompatible fluids can damage seals and pose a safety hazard.
What safety precautions should I take when using the pump?
Always wear safety glasses and use certified high-pressure components. Never exceed the maximum rated pressure. Ensure all connections are secure before pressurizing and keep hands away from leak paths.
How do I fine-tune pressure with the adjustable hand wheel?
Turn the fine adjustment hand wheel clockwise to increase pressure and counterclockwise to decrease it for precise calibration settings.
Where can I find spare parts for the 730HTP70M?
Spare parts are available through Fluke authorized distributors. Common replacements include o-rings, piston seals, check valves, and reservoir caps. Reference the model number when ordering.
User questions about 730HTP70M FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pump in PDF format for free! Find your manual 730HTP70M - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. 730HTP70M by FLUKE.
USER MANUAL 730HTP70M FLUKE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : FLUKE
Model : 730HTP70M
Category : Pump