ELECTRO-VOICE

EVC-1122-64 - Loudspeaker ELECTRO-VOICE - Free user manual and instructions

Find the device manual for free EVC-1122-64 ELECTRO-VOICE in PDF.

📄 42 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice ELECTRO-VOICE EVC-1122-64 - page 3
Pick your language and provide your email: we'll send you a specifically translated version.
Brand Electro-Voice
Product Type Two-way passive full-range loudspeaker
Model Number EVC-1122-64
Enclosure Type Vented bass-reflex enclosure
Woofer 12-inch high-sensitivity woofer
High-Frequency Driver 1.25-inch titanium-diaphragm compression driver
Coverage Angle (H x V) 60° x 40°
Frequency Response 60 Hz - 20 kHz
Crossover Frequency 1.8 kHz
Nominal Impedance 8 ohms
Power Handling (Continuous) 300 W
Power Handling (Peak) 1200 W
Sensitivity (1W/1m) 96 dB
Maximum SPL 121 dB
Connectors Dual NL4 SpeakON connectors with parallel screw terminals
Mounting / Rigging 12 x M10 threaded mounting points and 36 mm pole socket
Dimensions (H x W x D) 617 x 372 x 350 mm
Weight 19 kg
Enclosure Material Weather-resistant plywood with durable EVCoat finish
Grille Heavy-duty steel grille with protective acoustic foam
Cleaning and Care Wipe enclosure with dry cloth; keep grille free of dust
Safety and Compliance Rigorously tested suspended-safety rated; install with safety wire
Spare Parts and Service Drivers, crossovers and grilles are serviceable components

Frequently Asked Questions - EVC-1122-64 ELECTRO-VOICE

What is the coverage angle of the Electro-Voice EVC-1122-64 loudspeaker?
The EVC-1122-64 provides a 60° x 40° coverage pattern. Use the 40° vertical coverage for long-throw applications or when aiming the speaker precisely at the audience.
How much power can the EVC-1122-64 handle?
The speaker handles 300 W continuous and 1200 W peak. Ensure the amplifier delivers a clean signal within this range to avoid damaging the drivers.
What is the nominal impedance and how should I connect it?
The nominal impedance is 8 ohms. Connect via the dual NL4 SpeakON connectors or the screw terminals, observing correct polarity (+/-) to maintain proper phase.
Can I use the EVC-1122-64 outdoors?
Yes, the EVC series uses a weather-resistant plywood enclosure with durable EVCoat finish. Still, protect connectors from direct rain and use appropriate covers for long-term outdoor installation.
How do I mount or rig the speaker safely?
Use the 12 M10 threaded mounting points with rated eyebolts or brackets. Always attach a secondary safety wire and follow the current lifting/rigging regulations for overhead installations.
Does the EVC-1122-64 have a pole mount socket?
Yes, it has a 36 mm pole socket. Use a compatible steel pole and install the speaker on a subwoofer or stand for fixed horizontal or tilted coverage.
What kind of amplifier should I use?
Use an amplifier that delivers between 300 W and 600 W RMS per channel into 8 ohms. Do not exceed the continuous power rating when driving the speaker with program material.
How should I clean and maintain the loudspeaker?
Wipe the cabinet and grille with a dry, soft cloth. Do not use solvents or water jets, and periodically check that the grille and all mounting points are free of corrosion and debris.
Can I combine several EVC-1122-64 speakers together?
Yes, connect multiple 8-ohm speakers in parallel only if the amplifier is stable at 4 ohms (two per channel). Check the total impedance during installation to avoid overloading the amplifier.
What spare parts are available and is the unit repairable?
The woofer, compression driver, crossover and grille are replaceable service parts. Contact an authorized Electro-Voice service center for genuine spare components and repair procedures.

User questions about EVC-1122-64 ELECTRO-VOICE

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Loudspeaker in PDF format for free! Find your manual EVC-1122-64 - ELECTRO-VOICE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EVC-1122-64 by ELECTRO-VOICE.

USER MANUAL EVC-1122-64 ELECTRO-VOICE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : ELECTRO-VOICE

Model : EVC-1122-64

Category : Loudspeaker