ZX-1 Sub - Loudspeaker ELECTRO-VOICE - Free user manual and instructions
Find the device manual for free ZX-1 Sub ELECTRO-VOICE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer |
| Brand | Electro-Voice |
| Model | ZX-1 Sub |
| Dimensions (W x H x D) | 15.7 x 12.6 x 15.6 in (399 x 320 x 396 mm) |
| Weight | 30.0 lb (13.6 kg) |
| Power Amplification | 250 W RMS (Class D) |
| Frequency Response | 40 Hz - 150 Hz (-3 dB) |
| Maximum SPL | 126 dB peak |
| Low-Pass Filter | Adjustable, 50-150 Hz |
| Phase Switch | 0°/180° |
| Input Connectors | XLR, 1/4" TRS, RCA |
| Output Connectors | XLR (Thru) |
| Enclosure Material | Polypropylene |
| Grille | Steel with powder coat |
| Application | Portable PA, installed sound |
| Maintenance & Cleaning | Wipe with dry cloth; avoid moisture |
| Safety | Do not expose to rain; use grounded outlet |
| Spare Parts & Repairability | Contact authorized Electro-Voice dealer |
| General Information | Designed for low-frequency extension of ZX-1 |
Frequently Asked Questions - ZX-1 Sub ELECTRO-VOICE
How do I connect the ZX-1 Sub to my mixer?
Use a balanced XLR or 1/4" TRS cable from the mixer's output to the sub's input. If your mixer has a dedicated sub output, connect to that. Otherwise, use the main outputs and set the low-pass filter accordingly.
What is the best placement for the subwoofer?
Place the subwoofer on the floor near a wall or corner for enhanced low-frequency response. Avoid placing it directly in front of microphones to prevent feedback.
How do I set the low-pass filter?
Turn the low-pass filter knob to the desired crossover frequency (typically 80-100 Hz). Set it where the sub seamlessly blends with your main speakers.
Why is there no sound from the subwoofer?
Check that the sub is powered on, the volume is up, and the input cable is connected properly. Verify that the mixer's output is active and not muted.
Can I use the ZX-1 Sub with other speaker brands?
Yes, the subwoofer has standard inputs and can be used with any full-range speaker. However, for optimal performance, pair it with Electro-Voice ZX-1 tops.
How do I connect two ZX-1 Subs?
Daisy-chain them using the XLR Thru connector on the first sub to the input of the second sub. Ensure both are powered and set to the same volume and filter settings.
What is the phase switch for?
The phase switch (0°/180°) adjusts the polarity of the subwoofer. Set it to 0 for normal operation; if the bass sounds weak, try 180° to align phase with your main speakers.
How do I clean the subwoofer?
Use a soft, dry cloth to wipe the exterior. Do not use water or cleaners. Keep the grille free of dust to avoid blocking sound.
The subwoofer goes into protect mode. What does it mean?
Protect mode activates if the sub is overheating or overloaded. Turn it off, let it cool for 15 minutes. Check that the input signal is not clipping and that ventilation is not blocked.
Can I mount the ZX-1 Sub on a pole?
Yes, it has a pole mount socket for use with satellite speakers. Insert a standard speaker pole and attach your top speakers for a elevated setup.
User questions about ZX-1 Sub ELECTRO-VOICE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual ZX-1 Sub - ELECTRO-VOICE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ZX-1 Sub by ELECTRO-VOICE.
USER MANUAL ZX-1 Sub ELECTRO-VOICE
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : ELECTRO-VOICE
Model : ZX-1 Sub
Category : Loudspeaker