EVF-1152D/43 - Loudspeaker ELECTRO-VOICE - Free user manual and instructions
Find the device manual for free EVF-1152D/43 ELECTRO-VOICE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Professional two-way full-range loudspeaker |
| Brand | Electro-Voice |
| Model | EVF-1152D/43 |
| Coverage Pattern | 60° x 40° |
| Frequency Response (-3 dB) | 65 Hz - 18 kHz |
| Frequency Range (-10 dB) | 50 Hz - 20 kHz |
| Power Handling (Continuous) | 600 W |
| Power Handling (Peak) | 2400 W |
| Impedance (Nominal) | 8 ohms |
| Sensitivity (1 W/1 m) | 100 dB |
| Maximum SPL | 136 dB peak |
| LF Driver | 15-inch woofer, weather-resistant cone |
| HF Driver | 1.25-inch titanium diaphragm compression driver |
| Horn | Constant-directivity, rotatable 60° x 40° |
| Enclosure | High-density multi-ply birch with anti-resonance bracing |
| Finish | Black textured catalytic polymer |
| Grille | Powder-coated steel with weather-resistant backing |
| Connectors | 2 x Neutrik NL4 SpeakON and screw terminal strip |
| Rigging | M10 threaded inserts with multi-angle suspension points |
| Dimensions (H x W x D) | 691 x 483 x 414 mm (27.2 x 19.0 x 16.3 in) |
| Weight (Net) | 35.4 kg (78.0 lb) |
| Powering | Passive full-range; external amplifier required |
| Maintenance | Clean with a dry cloth; inspect grille and rigging hardware regularly |
| Safety | Suspend only with certified hardware; follow local safety regulations |
| Repairability | Genuine replacement drivers and parts available via authorized service centers |
Frequently Asked Questions - EVF-1152D/43 ELECTRO-VOICE
What is the coverage angle of the EVF-1152D/43?
The loudspeaker provides 60 degrees horizontal and 40 degrees vertical coverage through its rotating constant-directivity horn.
Can the EVF-1152D/43 be used outdoors?
Yes, it is engineered for demanding environments with a weather-resistant enclosure and treated drivers, but prolonged rain exposure should be avoided.
How much amplifier power is recommended for this speaker?
Use an amplifier capable of delivering 600 to 1200 Watts into 8 ohms for reliable program use, and set limiters to protect the system.
Does this model support bi-amping or tri-amping?
The EVF-1152D/43 is a passive two-way system with an internal crossover, so it requires a single amplified channel and does not provide user-accessible HF/LF terminals.
What is the nominal impedance of the EVF-1152D/43?
The nominal impedance is 8 ohms, which makes it compatible with most professional power amplifiers in the intended power range.
What rigging points are available for installation?
The cabinet is fitted with M10 threaded inserts and optional yoke/track mounts for safe horizontal, vertical, or splay installations.
How should I set the high-pass filter on a DSP?
Set a 24 dB/octave high-pass filter at 50-60 Hz to prevent excessive low-frequency excursion and protect the 15-inch woofer.
How do I maintain the loudspeaker's performance?
Regularly vacuum the grille, wipe the enclosure with a dry cloth, and inspect the connectors and rigging hardware for corrosion or loosening.
Can the horn be rotated for vertical mounting?
Yes, the constant-directivity horn can be rotated to maintain coverage orientation when the speaker is installed vertically.
Where can I find spare parts for the EVF-1152D/43?
Genuine parts such as the 15-inch woofer, compression driver and grille are available through Electro-Voice authorized distributors; refer to your manual for part numbers.
User questions about EVF-1152D/43 ELECTRO-VOICE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Loudspeaker in PDF format for free! Find your manual EVF-1152D/43 - ELECTRO-VOICE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EVF-1152D/43 by ELECTRO-VOICE.