XLc 200 A - Subwoofer BLAUPUNKT - Free user manual and instructions
Find the device manual for free XLc 200 A BLAUPUNKT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Subwoofer |
| Brand | Blaupunkt |
| Model | XLc 200 A |
| Category | Subwoofer |
| Amplifier | Built-in active amplifier |
| Amplifier Power | 200 W maximum output |
| Speaker Size | 200 mm (8 inch) driver |
| Frequency Response | 30 Hz to 200 Hz |
| Impedance | 4 ohms |
| Sensitivity | 90 dB |
| Power Source | 12 V DC car electrical system |
| Inputs | High-level speaker input and RCA line-in |
| Adjustments | Low-pass filter, bass boost and level control |
| Protection | Thermal and short-circuit protection |
| Dimensions (approx.) | 350 x 220 x 80 mm |
| Weight (approx.) | 3.5 kg |
| Mounting | Compact enclosure for under-seat or trunk installation |
| Enclosure | Sealed MDF enclosure |
| Maintenance | Clean external surfaces with a dry, soft cloth |
| Safety | Disconnect the battery before installation or service |
| Repair | No user-serviceable parts; use qualified service personnel |
Frequently Asked Questions - XLc 200 A BLAUPUNKT
What is the difference between active and passive subwoofers?
The Blaupunkt XLc 200 A is an active subwoofer with a built-in amplifier, while a passive subwoofer needs an external amplifier.
How do I connect the subwoofer to a car stereo?
Use the high-level speaker inputs for factory stereos, or connect the RCA line-in to an aftermarket unit. Connect power to a 12 V battery source, ground the negative terminal to the chassis, and connect the remote turn-on wire if present.
What fuse should I use for the Blaupunkt XLc 200 A?
Use a fuse with the rating shown in the manual, typically 15 amperes. Never install a higher-rated fuse as this may damage the subwoofer.
How do I adjust the low-pass filter and bass boost?
Set the low-pass filter between 80 and 120 Hz so the subwoofer only handles bass frequencies. Use the level control to match the volume and add bass boost gradually to prevent distortion.
Can I install the XLc 200 A with a factory radio?
Yes, the high-level speaker inputs allow connection to a factory radio without RCA outputs. Follow the manual to identify the correct speaker wires.
What voltage does the subwoofer require?
It operates on a 12 V DC car electrical system. Do not plug it into household mains power.
How often should I check the subwoofer connections?
Inspect power, ground and speaker connections every few months to ensure they are tight and free of corrosion. Loose connections can cause sound distortion.
Is this subwoofer suitable for outdoor installation?
No, the XLc 200 A is designed for installation inside the vehicle cabin. Keep it away from moisture and extreme temperatures.
What should I do if the subwoofer has no sound?
Check the power LED, fuses, remote turn-on wire and input cables. Verify that the volume, gain and low-pass filter settings are correct and that the head unit is delivering a signal.
Is a remote bass level control included?
Certain package versions include a remote bass control for adjusting bass from the front seat. Check the package contents; if not included, use the controls on the subwoofer panel.
User questions about XLc 200 A BLAUPUNKT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual XLc 200 A - BLAUPUNKT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. XLc 200 A by BLAUPUNKT.
USER MANUAL XLc 200 A BLAUPUNKT
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BLAUPUNKT
Model : XLc 200 A
Category : Subwoofer