ProLiant DL145 G3 - Server HP - Free user manual and instructions
Find the device manual for free ProLiant DL145 G3 HP in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Rack-mountable server |
| Brand | HP |
| Model | ProLiant DL145 G3 |
| Form Factor | 1U |
| Processor | AMD Opteron 2000 series (up to dual processors) |
| Chipset | NVIDIA nForce Professional 2200 |
| Memory | DDR2 ECC Registered SDRAM |
| Maximum RAM | 32 GB (8 slots) |
| Storage Bays | Four 3.5-inch non-hot-plug SATA bays |
| Hard Drive Interface | SATA 3.0 Gb/s |
| Network Interface | Dual port Gigabit Ethernet |
| Expansion Slots | 1 x PCI Express x16, 1 x PCI-X |
| Power Supply | 110/220 V AC, 400 W power supply |
| Dimensions (W x D x H) | 426 x 610 x 43 mm |
| Weight | Approximately 13.5 kg |
| Operating Temperature | 10°C to 35°C |
| Operating Humidity | 20% to 80% RH (non-condensing) |
| Security Features | Chassis intrusion detection, front bezel lock |
| Maintenance & Cleaning | Dust filters and periodic vacuum cleaning recommended |
| Spare Parts & Repairability | Modular components: hot-swap fans, replaceable PSU |
| Warranty | Standard 1-year hardware warranty with 24x7 support |
| Included Documentation | Quick start guide, safety sheet, warranty card |
Frequently Asked Questions - ProLiant DL145 G3 HP
What is the HP ProLiant DL145 G3?
The HP ProLiant DL145 G3 is a 1U rack server designed for high density environments, featuring AMD Opteron processors and up to 32GB of RAM.
Which processors are supported by the DL145 G3?
It supports up to two AMD Opteron 2000 series processors with Socket F (1207).
How much memory can be installed?
The server has 8 DIMM slots with a maximum capacity of 32GB DDR2 ECC registered memory.
What storage options are available?
It offers four non-hot-plug SATA bays supporting 3.5-inch drives, with optional controller.
Does the server have built-in networking?
Yes, it includes dual gigabit Ethernet ports for redundant network connectivity.
How do I clean the server?
Power off and unplug the server, then use compressed air or a soft brush to remove dust from the internal fans and heatsinks. Clean external surfaces with a mild cloth.
Can I replace components without taking down the server?
Most components such as fans and power supply are hot-swap capable, but processors and memory require shutdown.
What are the power requirements?
The server uses a 400W power supply compatible with 110/220V AC, with redundant option.
How to access remote management?
Use the optional Integrated Lights-Out (iLO) remote management card to access the console over network.
What is the typical weight and dimensions?
It is 1U high, approximately 426 x 610 x 43 mm, and weighs 13.5 kg.
User questions about ProLiant DL145 G3 HP
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual ProLiant DL145 G3 - HP and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ProLiant DL145 G3 by HP.
USER MANUAL ProLiant DL145 G3 HP
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : HP
Model : ProLiant DL145 G3
Category : Server